Dish Network EZ manual HOW to Check the TV Codes

Page 24

HOW TO CHECK THE TV CODES

You can find out what TV code is set up in your remote control when you complete the following instructions.

1. Hold until SATT V lights turn on (it takes about five seconds).

2.

Release

.

T V light flashes.

3.

Press T V .

T V

stays on.

4.

Press the MUTE button twice. T V flashes the

 

number for each digit of the device code, with a

 

pause between the groups of flashes. A quick flash

 

is zero.

 

 

Example: For the code 570, the TV POWER button flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

HOW TO CHECK THE VCR CODES

You can find out what VCR code is set up in your remote control when you complete the following instructions.

1. Hold until SATT V lights turn on (it takes about five seconds).

2. Release . T V light flashes.

3. Press the RECALL button. T V stays on.

4.Press the MUTE button twice. T V flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is zero.

Example: For the code 590, the TV POWER button flashes five times, pauses, flashes nine times, pauses, and flashes once quickly.

118866

23

Image 24
Contents EZDISHCANCELtwrkE Contents of this Guide EZ Remote About the Dish Network EZ Remote Control Buttons and Features OverviewInstalling Batteries Receiver Upgrade Setting UP to Switch the TV to Watch Satellite ProgrammingConnect a coaxial cable between the TV Set Out on None work, go to How to Scan for TV and VCR Press and to change channels on your TV 118866 How I Change My TV Channels Light will flash Press Setting UP to Switch the TV to a Preferred OFF-AIR Channel Off-Air Antenna Connections 118866Setting UP on the Remote Control Your TV Connecting Your Satellite RECEIVER, VCR, and TV Connecting a Satellite Receiver, VCR Setting UP on Your Remote Control Write the number in from page 15 into the blank in below How I Change My VCR Channels Using When a VCR is Installed To Pass Satellite Programming Through Your VCR toOther Remote Control Instructions Lights turn on it takes HOW to Check the TV Codes HOW to Remove TV Codes HOW to USE the Remote Control Press the Menu button to open the Main Menu UP/DOWN/LEFT/RIGHT Buttons Cancel Cancel Button Dish Button Press the Power button to turn the TV on or off Use the Channel UP/DOWN buttons to change channels on the TV TV and VCR Codes AOCCXC JBL JVCKTV LXIMGA MTCRCA SBR SSSTMK VCR Codes ASACCE DBXITT KLHMEI 544 STS Technics 553 Teknika 554, 588 Limited Warranty Advance Exchange Program Post Receipt Exchange Program 118866 Regulatory Factors