•Press 
and 
to change channels on your TV.
• Press |
| VOL | to change the TV volume. |
|
|
|
|
If these buttons work, go on to the next section to
set up 
. If not, pick another code for your TV brand from the TV Codes table and go back to step 3.
SETTING UP 
ON YOUR REMOTE CONTROL
1.Make sure your TV and satellite receiver are connected and your remote control is set up to control your TV using the instructions in the last two sections.
2.Turn on your TV and tune to a channel other than 3 (for example, 4 or 5).
3.Press 
and your satellite receiver should turn on and your TV should tune to Channel 3.
4.Press the MENU button. If you see the satellite receiver Menu screen, go to step 5. If not, go to step 15.
5.If you want to keep your satellite programming on TV Channel 3, check the box below and go to step 28.
3
6.If you prefer to have your satellite programming on TV Channel 4, go on to step 7.
8 | 118866 |