Dish Network 3.0, 3.1, 3.2 Setting UP to Control Other Devices, Combination Devices, Limited Mode

Page 9

SETTING UP TO CONTROL OTHER DEVICES

To use the remote to control other devices (such as a TV, VCR, DVD player, tuner, or amplifier), you must first program it to control these other devices. You can do this by either following the instructions in Setting Up Using Device Code Tables on page 8, or the Setting Up Using Device Codes Scan procedure described on page 9.

COMBINATION DEVICES

If you are programming the remote to control a combination device, such as a TV/VCR or a VCR/DVD, program the remote control in one mode, and then repeat the procedure in the other mode. For example, to program the remote to control a TV/VCR using code 748, follow the instructions to program the remote to control the TV using code 748, and then repeat the instructions for the VCR using the same code.

LIMITED MODE

You can program your remote control in limited mode to keep from accidentally changing the channel on your TV or VCR. When you use the remote to control your TV in limited mode, you will only be able to use the POWER, MUTE, and VOLUME buttons. Also, when you use the remote to control your VCR in limited mode, you will only be able to use the power and VCR function buttons. The section Setting Up Using Device Codes Tables has a step that tells the remote control to go into limited mode.

Note: Limited mode is not used with audio amplifiers.

SETTING UP USING DEVICE CODE TABLES

You can set up the remote to control other devices using the device codes listed on page 25.

1.Use the device’s buttons or its remote control to turn on the device.

2.Find the brand name of the device in the tables starting on page 25.

If the brand isn’t listed, see Setting Up Using Device Codes Scan on page 9.

3.Press and hold the mode button for the device you want the remote to control, for about three seconds. When all the other mode buttons light up, let go of the mode button - that mode button should now be flashing.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Wireless Remote Control Safety InstructionsInstallation Regulatory FactorsTable of Contents Models Supported by this Guide Remote Control BasicsUHF and IR Signals Installing BatteriesConverting the 4.0 Remote Control Setting UP to Control the Satellite Receiver Select Enable from the TV1 UHF Pro Setup screen Checking the Remote Address Limited Mode Setting UP to Control Other DevicesSetting UP Using Device Code Tables Combination DevicesOnly for limited mode, Press Setting UP Using Device Code ScanChecking the Device Codes To set the remote to control the device’s volume Switching Between TV and Device Volume ControlOperating Modes Remote Control OperationPower Buttons Controlling the Satellite Receiver SAT Mode ButtonVolume Button TV/VIDEO ButtonMenu Button Mute ButtonUP and page Down Buttons Guide ButtonSelect Button Arrow ButtonsRecall Button Info ButtonView TV Button Cancel ButtonDish Button Number ButtonsRecover Button Star * ButtonPound # Button Using the Recover Button Controlling a TV or a Second TV TV Mode ButtonUP/DOWN Arrow Buttons VCR Mode Button Power ButtonControlling a VCR or a Second VCR or a DVD Player VCR Buttons Controlling a Tuner or Amplifier AUX Mode ButtonSelect Button Device Codes TV CodesJBL MTC SBR VCR Codes STS DVD Player Codes TV/VCR Combo CodesTuner Codes Amplifier TUNER/AMPLIFIER CodesCodes DVD/VCR ComboWhat’s What’s Wrong What You Can Do Happening TroubleshootingTo use. See Remote Control Setup Limited Warranty Advance Exchange Program Post Receipt Exchange Program Accessory WarrantySee Troubleshoot the Remote on If YOU Need HelpPage Page Page Page
Top Page Image Contents