Remote Control Basics

This remote control gives you easy access to all the features of a DISH Network satellite TV receiver. You can set up the remote to control the satellite TV receiver and up to three other devices. These devices can be a TV, a VCR or DVD player, and a third device.

MODELS SUPPORTED BY THIS GUIDE

This user’s guide supports the following remote control models as shown on the label on the back of the remote:

•3.0/3.1/3.2 - Infrared (IR) only. For use with appropriate IR-controlled DISH Network receivers.

•4.0 - Infrared/Ultra-High Frequency Pro (IR/UHF Pro). For use with appropriate UHF Pro-controlled DISH Network receivers. The 4.0 remote can be converted to one of three different remote types used on a DISH 322 receiver:

With the blue 2 UHF Pro key installed, this remote will operate the UHF Pro side of the DISH 322 receiver. The remote comes with this key already installed.

With the green 1 key installed (no UHF Pro marking), this remote will operate the IR side of the DISH 322 receiver. This remote will look and work exactly like a 3.0 IR remote. See instructions in Converting the 4.0 Remote.

With the green 1 UHF Pro key installed, this

1 remote will operate the side of the DISH 322 receiver from a distance using UHF Pro. See instructions in Converting the 4.0 Remote.

If you set up your DISH 322 to operate the side using UHF Pro, the two UHF Pro remotes for this receiver will interfere with each other when operated at the same time. This may prevent the remotes from operating the receiver momentarily.