For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash.
4.Only for the AUX mode, Use a number button to enter 0 for a second TV, or 1 for a second VCR or DVD player, or 2 for a tuner or amplifier.
5.Use the number buttons to enter one of the device codes from the table.
6.Only for limited mode, Press 1.
Note: If you want to use all of the remote control’s features in TV mode, reprogram the remote control following these instructions but skip step 6.
7.Press the POUND (#) button. If you entered
the code correctly, the mode button flashes three times.
8.Press the blank POWER button to test if the code works for the device. If it does, the device should turn off.
9.Turn the device back on and try some other buttons to make sure they work. Sometimes, the blank POWER button works when other buttons don’t. If the code works for other buttons, stop here.
10.If the code you entered doesn’t work, do steps 3 through 9 again with another device code from the tables.
11.If you cannot find a code that works, try Scan for Device Codes below.
SETTING UP USING DEVICE CODE SCAN
If the code for your device is not listed in the tables on starting page 25, use this procedure to scan the remote control’s memory for the device code.
1.Use the device’s buttons or its remote control to turn the device on.
2.Press and hold the mode button for the device you want the remote to control, for about three seconds. When all the other mode buttons light up, let go of the mode button - that mode button should now be flashing.
For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash.
9