Dish Network 3.0, 3.1, 3.2 warranty To use. See Remote Control Setup

What’s	What’s Wrong	What You Can Do
Happening
When you	• Maybe you’re	• Remember, the remote control uses
press a button	trying to control a	IR signals to control all devices
on the remote	device and	except for the receiver (when using
control, the	you’re not	the UHF antenna). IR signals travel
device doesn’t	pointing the	only 40 feet or less, and can’t go
do what you	remote control	through walls or other solid objects.
expect.	right at it.	You must point the remote control
		right at the device, with no objects to
		block the signal path.
	• Maybe the	• If the batteries are missing or dead,
	remote control is	put fresh AAA-size batteries in. If
	missing	the remote has fresh batteries,
	batteries, maybe	check whether you put them in the
	you put the	right way. If you didn’t, take them
	batteries in the	out and put them in the right way.
	remote the
	wrong way, or
	maybe the
	batteries are
	weak or dead.
	• Maybe you didn’t	• Press the correct mode button to set
	set the remote to	the remote to the mode for the
	the mode for the	device you want
	device you want	to control.
	to control.
	• Maybe you didn’t	• Make sure you set up the remote
	set up the remote	to control all the devices you want
	to control the	to use. See Remote Control Setup
	device.	on page 5.
	• UHF signals from	• Change your remote and receiver
	a neighbor’s	address (see Setting Up to Control
	remote may be	the Receiver on page 5).
	controlling your
	receiver.
When you	• Maybe you have	• See Setting Up to Control Other
press the	not set up the	Devices on page 8.
remote control	remote control.
Mute or	• Maybe you’re	• Set up the remote to control either
Volume
	trying to control	TV volume or tuner/amplifier
button,
	TV volume but	volume, whichever you want.
nothing
	you set up the
happens.
	remote
	to control a tuner
	or amplifier in
	AUX mode.
	• Maybe you’re
	trying to control
	tuner or amplifier
	volume but you
	set up the remote
	to control a TV
	in AUX mode.

35