Dish Network 3.1, 3.0, 3.2 warranty Remote Control Operation, Operating Modes

2.Press the POUND (#) button.

3.Press the plus (+) side of the VOLUME button.

4.Press the 0 number button.

5.Press the POUND (#) button.

The TV mode button flashes three times.

6.Press the SAT mode button.

7.Press the plus (+) and minus (-) sides of the VOLUME button.

The TV’s volume changes and the TV mode button lights instead of the AUX mode button.

REMOTE CONTROL OPERATION

OPERATING MODES

You can set the remote to four different modes to control the receiver or other devices. You may need to change the remote address to operate the receiver. See Setting Up to Control the Receiver on page 5. You must set up the remote to control a device like a TV, VCR, or DVD player. See Setting Up to Control Other Devices on page 8.

Use the remote control’s mode buttons, SAT (satellite receiver), TV (for a TV), VCR (for a VCR or a DVD player), and AUX (“auxiliary,” for a second TV, a second VCR, a tuner, or an audio amplifier) to set the remote to the right mode for the device. To change the mode, press the button for the device you want the remote to control. The mode button lights for two seconds to show you’ve set the remote to that mode.

12