Radio Shack 7-in-1 Remote Control with Lighted Keypad owner manual Using the 7-IN-1’S Timer

15-1924.fm Page 12 Monday, July 19, 1999 12:50 PM

In this case, you must press the desired device key before you use the remote con- trol’s CHANNEL + (On) or CHANNEL – (Off) keys.

•If you selected AUX1 or AUX2, you can punch-through TV, VCR, or CBL if you have not programmed AUX1 or AUX2 as a TV, VCR, or CBL device.

USING THE 7-IN-1’S TIMER

This feature lets you set your 7-in-1 to turn off your TV after 60 minutes.

1.Press TIMER on the 7-in-1.

2.Within 15 seconds, press ENT on the 7-in-1. The red light blinks once.

Note: If you do not press ENT within 15 sec- onds, the red light does not blink. Start again from Step 1.

3.Leave the 7-in-1 pointing at the TV’s infrared sensor. Make sure there is nothing blocking the line of sight between the 7-in-1 and the TV.

To cancel the timer, hold down TIMER until the red light blinks once, or press TV then press POWER (All Lts On).

PLUG ’N POWER FUNCTIONS

The Plug ’n Power feature allows you to control lights and appliances with an optional IR com- mand console (RadioShack Unlimited No. 10037703) or Plug ’n Power Wireless Remote Control System (Cat. No. 61-2676). You also need Plug ’n Power light modules and appliance modules (available through your local Ra- dioShack store) to use this feature.

Need help? Call 1-800-989-4706

12