IF YOU HAVE PROBLEMS
MANUAL CODE SEARCH
If the 7-in-1 Remote Control does not operate your remote-controlled devices when you first set it up, you might have to manually find the correct code for your devices. You can try all the codes listed in “Manufacturers’ Codes” on Page 23 for the brand of your device, or you can follow these steps to search the 7-in-1’s entire library.
1.Manually turn on the device you want to set up.
2.Hold down SET UP on the 7-in-1 until the red
light above 
turns on.
3.Press the corresponding device key on your 7-in-1 Remote Control (TV, VCR, CBL, CD, and so on). Or, to search all the codes avail- able to AUX1 or AUX2 to control a device, press AUX1 or AUX2 then the corresponding device key. The red light blinks once.
4.Aim the 7-in-1 Remote Control at the device you want to operate.
5.Repeatedly press On (CHANNEL + (On), PLAY, or POWER (All Lts On) until the device responds to the command.
6.When the device responds to the command, press ENT within 5 seconds to save the code.
Notes:
•If you accidentally overshoot the correct code, repeatedly press LAST then On
(CHANNEL + (On), PLAY, or POWER (All Lts On) on the 7-in-1 to move back through the codes until the device responds to the command.
•If you do not press ENT within 5 seconds, the 7-in-1 does not save the code.
Need help? Call 1-800-989-4706
20
