Radio Shack 7-in-1 Remote Control with Lighted Keypad owner manual Teaching a Command

Page 18

15-1924.fm Page 18 Monday, July 19, 1999 12:50 PM

You can store a command into any of the 7- in-1’s keys except SET UP, LEARN, Plug ’n Power, TV, VCR, CBL, CD, AUX1, AUX2, SAT, SHIFT, ENT, and TIMER.

You can store a command in one of the 7-in- 1’s keys where you have to press SHIFT then the key to activate the command. This lets you store more commands.

Teaching a Command

Important: Make sure there are fresh batteries in both the 7-in-1 and the original remote control be- fore following the steps in this section.

Hint: Program only one or two of your original re- mote control’s commands into the 7-in-1 at a time using the steps in this section, then try those com- mands before programming more commands.

Follow these steps to teach a command from an- other remote control to one of your 7-in-1’s keys.

1.If this is the first time you are teaching a command to your 7-in-1, follow the steps in “Clearing All Commands” on Page 19.

2.Position the 7-in-1 and the original remote control about 1 or 2 inches apart, so the 7-in- 1’s infrared eye is pointing at the original remote control’s infrared eye. Make sure there is nothing blocking the line of sight between the two.

3.Hold down SET UP on the 7-in-1 until the red

light above turns on.

4.Press the device key on the 7-in-1 for the device you want to control. The red light blinks.

5.Press LEARN on the 7-in-1.

6.Within 15 seconds, press the key on the 7-in- 1 that you want to program. For example, if you want to program the PLAY command

Need help? Call 1-800-989-4706

18

Image 18
Contents In-1 Remote Control with Lighted Keypad Features Fm Page 3 Monday, July 19, 1999 1250 PM Contents HOW the 7-IN-1 Works REC Pause TimerGuide Play REWInstalling Batteries PreparationLighting the Keys Device TypesSetting UP Your 7-IN-1 SET UP TV 1- 8Using Two or More Similar Devices Operation PUNCH-THROUGHUsing the 7-IN-1’S Timer Plug ’N Power FunctionsEntering a Plug ’n Power House Code Fm Page 14 Monday, July 19, 1999 1250 PM Channel + On or Channel Off Setting a Plug ’n Power Timer Teaching Commands to the 7-IN-1 Teaching a Command Clearing All Commands If YOU have Problems Manual Code SearchDetermining the 3-Digit Code Troubleshooting Audio Receivers MANUFACTURERS’ CodesAudio Amplifiers Audio SystemsManufacturer Codes Cat. No Cable Converters NSCRCA Cassette Player CD PlayersADC Manufacturer Codes Cat. No CD Players NSM SAESTS Laser Disc Players DIRECT-TO-HOME Satellite ReceiversHome Automation Satellite ReceiversManufacturer Codes Cat. No Satellite Receivers TelevisionsADA Manufacturer Codes Cat. No Televisions AOCCXC IMA JBLJCB MEI KECKTV MTCNTC Fm Page 34 Monday, July 19, 1999 1250 PM SSS TMKVCRs Manufacturer Codes Cat. NoTV/VCR Combinations CCEHI-Q JCLKLH Logik 074 Fm Page 39 Monday, July 19, 1999 1250 PM Fm Page 40 Monday, July 19, 1999 1250 PM Fm Page 41 Monday, July 19, 1999 1250 PM Fm Page 42 Monday, July 19, 1999 1250 PM Care and Maintenance Specifications Fm Page 45 Monday, July 19, 1999 1250 PM Fm Page 46 Monday, July 19, 1999 1250 PM Fm Page 47 Monday, July 19, 1999 1250 PM Limited Ninety-Day Warranty Division of Tandy Corporation