15-1924.fm Page 11 Monday, July 19, 1999 12:50 PM
OPERATION
1.Press the device key for the device you want to control, then point the 7-in-1 at the device and press POWER (All Lts On) (or CHANNEL + (On) for some cable converters) to turn the device on.
2.Repeat Step 1 for all other devices you want to operate.
3.Point the 7-in-1 toward the device you want to control, then press the appropriate device key and the desired command keys.
Note: The command keys on the 7-in-1 work the same as the keys on the original remote control; however, the labeling might differ slightly.
4.To turn off the last device you selected, press POWER (All Lts On). To turn off other devices, press the device key for the device you want to turn off, then press POWER (All Lts On).
PUNCH-THROUGH
The punch-through feature lets you alternately control two different devices without pressing the device keys for each one. Here’s how it works.
Not all of the 7-in-1 Remote Control’s keys are used by every device. For example, a TV is often the only device that uses the volume keys. After you press TV, then press VCR, you can still use the volume control to control the TV.
Punch-through does not work when you are using the 7-in-1 to control CD players and Plug ’n Power devices.
Notes:
•The punch-through feature might not work if the last two devices you selected have the same (or similar) features. For example, most TVs and some cable converters have channel select keys on their remote controls.
Need help? Call 1-800-989-4706
11
