Note: If your device requires the use of an ENTER key to change channels, you must press ENTER instead of SET UP after each channel you enter into the 6 in 1 IR/RF Remote Control’s memory.
6.Repeat Steps
Using Favorite Channel Scan
To scan through your favorite channels, press SCAN and keep the 6 in 1 IR/RF Remote Control aimed at your device. The remote control scans through your selected channels.
The 6 in 1 IR/RF Remote Control stops scanning after it reaches the last channel in your Favorite Channel Scan list. To stop scanning earlier, sim- ply press any key on the remote control.
Clearing Favorite Channel Scan
To clear the favorite channel feature of all entries:
1.Hold down SET UP until the red indicator light blinks twice.
2.Press 9 – 9 – 6. The red light again blinks twice.
3.Press and release SET UP, then hold down SET UP until the red light blinks twice again.
Need help? Call
14