Radio Shack 15-1925 owner manual Determining the 3-Digit Code

15-1925.fm Page 21 Monday, July 19, 1999 12:59 PM

If necessary, repeat these steps for each device.

Determining the 3-Digit Code

After you set up your 6 in 1 IR/RF Remote Control using the manual code search, you can find which 3-digit code the 6 in 1 IR/RF Remote Control is set to by following these steps.

1.Press the device key you want to get the manufacturer’s code from.

2.Hold down SET UP until the red light blinks twice, then release it.

3.Press 9 – 9 – 0. The red light again blinks twice.

4.Press 1, and count the number of times the red light blinks. This is the first number of your 3-digit manufacturer’s code.

Note: If the red light does not blink, the digit is a zero.

5.Press 2 and count the number of times the red light blinks. This is the second number of your 3-digit manufacturer’s code.

Note: The red light does not blink if the sec- ond digit of your 3-digit manufacturer’s code is a zero.

6.Press 3 and count the number of times the red light blinks. This is the third digit of your 3-digit manufacturer’s code.

Note: The red indicator does not blink if the third digit of your 3-digit manufacturer’s code is a zero.

Need help? Call 1-800-950-7044

21