Radio Shack 15-1925 owner manual Favorite Channel Scan, Cbl

15-1925.fm Page 13 Monday, July 19, 1999 12:59 PM

2.Aim the 6 in 1 IR/RF Remote Control at the device and press SCAN. The 6 in 1 scans through the channels.

Note: The 6 in 1 must be pointed at the device the entire time you are using the Channel Scan feature.

3.To stop scanning, simply press any key (other than SCAN) on the remote control.

FAVORITE CHANNEL SCAN

The Favorite Channel Scan feature lets you set up your 6 in 1 IR/RF Remote Control to scan through a list of up to 10 pre-selected channels, stopping at each for about 3 seconds.

Setting Favorite Channel Scan

Note: Favorite Channel Scan can only be set up for one device. Once the Favorite Channel Scan feature has been set up for one device, you must clear it before you can set it up for another device.

1.Press the desired device key (TV, VCR, or

CBL).

2.Hold down SET UP until the red light blinks twice, then release it.

3.Press 9 – 9 – 6. The red light again blinks twice.

4.Enter the 2-digit number of the first channel. (Enter a 0 before a single-digit channel num- ber.)

5.After you have entered a channel number, press and release SET UP. The red light blinks twice.

For example:

0 – 9 – SET UP (for channel 9)

Need help? Call 1-800-950-7044

13