15-1925.fm Page 16 Monday, July 19, 1999 12:59 PM
3.Press and release SET UP, then hold down SET UP until the red light blinks twice. This means that your sequence is erased.
PUNCH-THROUGH
Using Punch-Through
The punch-through feature lets you alternately control two different devices without pressing the device selection keys for each one. Here’s how it works.
Not all of the 6 in 1 IR/RF Remote Control’s keys are used by every device. For example, a TV is often the only device that uses the volume keys. After you press TV, then press VCR, the volume control not used by the VCR retains its TV func- tion.
Note: The punch-through feature does not work if the last two devices you selected have the same (or similar) features. For example, most TVs and some cable converters have PWR keys on their remote controls. In this case, you must press the desired device key before you use the remote control’s PWR key.
Turning Punch-Through On and Off
If your cable converter or VCR has a volume con- trol, you can turn off the punch-through feature to allow the 6 in 1 to control the volume of those de- vices. This allows your cable converter or VCR to control the volume of your TV set (if it can already do so). Once you turn off punch-through, you must press the device key for the device (cable converter or VCR) you want to use to control the volume.
Need help? Call 1-800-950-7044
16
