Notes:
•You must hold the earpiece of your tele- phone over the receiver of your remote control as shown above. If you do not, the 6 in 1 IR/RF Remote Control might not be able to properly receive the information coming through the telephone.
•While the 6 in 1 IR/RF Remote Control is receiving information, the red light blinks occasionally to confirm the information transfer.
•When the 6 in 1 IR/RF Remote Control has successfully received the information for your infrared devices and downloading is completed, the red light blinks twice.
6.Press SETUP again after the red light blinks twice. The light blinks twice again.
Fast Search
If you have downloaded more than one device code, the remote control has a Fast Search fea- ture that allows you to quickly search all loaded device codes, one at a time, until you find the right one.
As soon as the upgrade operation is complete, the 6 in 1 IR/RF Remote Control is ready for you to fast search the downloaded codes. For exam- ple, to search the codes downloaded into the re- mote control’s TV memory:
1.Turn on your TV. Point the remote control at your TV and press TV then PWR. The remote control sends the power signal for the first TV code loaded.
2.If your TV does not turn off, press 1. Your remote control sends the power signal for the second TV code loaded.
Need help? Call
24