Operation Instruction
Play/Stop Button
Pressing the PLAY/STOP button enters the playback mode, and pressing the button again exits the playback mode. When entering the playback mode, video is paused. Pressing the 
(Play/Pause) button plays back video at regular speed. The screen displays 
when the DVR is in the Pause mode and the screen displays 
when the DVR is playing back video.
When in one of the
Camera Buttons
Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also used to enter passwords.
NOTE: When selecting camera channels 10 to 16, press the 10+ and then 0 to 6.
Arrow Buttons
These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting a number in the menu and using the Up and Down arrow buttons to increase or decrease the number’s value.
When in the PIP display format, pressing the Up and Down arrow buttons moves the position of the small screen
In the playback mode, pressing the 
button plays video backward at high speed. Pressing the button again toggles
the playback speed from 
, 
and 
. The screen displays 
, 
and 
respectively. Pressing the 
button plays video forward at high speed. Pressing the button again toggles the playback speed from 
, 
and 
.
The screen displays 
, 
and 
respectively. When in the pause mode, pressing the 
button moves to the next image and pressing the 
button moves to the previous image.
Play/Pause Button
In the live monitoring mode, pressing the 
button freezes the current screen and the screen displays 
icon. When in the playback mode, pressing the 
button plays back images at regular speed or pauses playing video.
Pressing the 
button selects a highlighted item or completes an entry that you have made during system setup.
HDD LED
The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.
Power LED
The POWER LED is lit when the unit is On.
USB Port
Two USB ports on the front panel are provided to connect external hard disk or flash drives for video clip copying or system upgrades. Position external drives close enough to the DVR so that you can make the cable connections, usually less than 6 feet. Use the USB cable provided with the hard disk drive to connect it to the DVR.
A USB mouse (not supplied) can be connected to one of the ports. You can use the mouse to navigate through the screens and menus much like you would on a computer.
A USB to Serial converter can be connected to the USB port. Multiple
8