Speco Technologies CS16 manual Internet Connection

Operation Instruction

Figure 18 — EZ Network screen.

Select the Finish button to finish the EZ Record and select the Go to EZ Network button to start the EZ Network.

If you selected the Go to EZ Network, select the Next button to start the EZ Network.

Internet Connection

Select whether or not your DVR is connected to the Internet.

LAN Setup

Select between Auto Configuration and Manual Configuration for network configuration, and then select the Test button to test the network configuration you selected.

NOTE: Selecting Auto Configuration allows the DVR to automatically obtain LAN parameters (IP address, Gateway, Subnet Mask and DNS Server address). Selecting Manual Configuration allows you to set up LAN parameters manually.

NOTE: The network configuration you set should be tested by selecting Test, otherwise the Next button will cannot be selected, and cannot move to the next step.

Use DSL/PPPoE Setup: Selecting the box allows you to set up the DSL network. Entering the ID and password for DSL connection is required.

20