Speco Technologies CS16 manual Searching Video, Select Playback Camera menu

Page 63

16-Channel Digital Video Recorder

Selecting All Channels plays back video of all cameras. The DVR maintains the same display format as it does in the live mode except for the PIP format. You can also change the screen layout in the same way as you do in the live mode.

Selecting the camera number under Triplex enters the Triplex mode and plays back video of the selected camera. When in the single-screen display format, the camera currently displayed on the screen will be selected and when in the PIP display format, the camera displayed on the PIP screen will be selected for the search channel. During the Triplex mode, the DVR maintains the same display format as it does in the live mode. A red outline surrounding the video and the camera title indicates the search channel. While in the Triplex Mode, the DVR continues recording cameras as they were set up in the recording schedule. Also, live monitoring will continue except for the camera that has been selected for playback.

Figure 68 — Select Playback Camera menu.

When playing video for the first time, the DVR will display the most recent image. When playing video subsequent times, the DVR will start playing video from the last recalled image. Recorded audio will be played when the DVR displays a camera with recorded audio in full screen mode.

NOTE: Only the administrator and users with Covert Camera View authority can view video from covert cameras. The covert cameras in the playback mode are determined by the current camera settings.

Camera Buttons: Pressing the individual camera buttons will cause the selected camera to display full screen.

Arrow Buttons: Pressing the button plays video backward at high speed. Pressing the button again toggles the

playback speed from , and . Pressing the button plays video forward at high speed. Pressing the

button again toggles the playback speed from , and . When in the pause mode, pressing the button moves to the next image and pressing the button moves to the previous image.

Play/Pause Button: Pressing the button plays back images at regular speed or pauses playing video.

Play/Stop Button: Pressing the PLAY/STOP button enters the playback mode, and pressing the button again exits the playback mode. When entering the playback mode, video is paused. Pressing the (Play/Pause) button plays back video at regular speed. The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back video.

You can use a mouse for convenient playback control. Position the mouse pointer on the playback screen, and the following Record Table Search (Compact View Mode) screen will display. The individual controls on the toolbar perform the following functions as described below:

Go to the previous image

Play/Pause

Go to the next image

Fast backward play

Fast forward play

 

Searching Video

While in the search mode, pressing the MENU button displays the following Search menu at the top of the screen. Pressing the ESC button hides the menu. You can navigate through menus and items by pressing the arrow buttons.

55

Image 63
Contents Page Page Compliance Notice of FCC Weee Waste Electrical & Electronic Equipment Table of Contents Digital Deterrent List of Illustrations Motion Detection Settings screen Technical Overview FeatureTypical DVR installation Required Installation Tools Package ContentsRS232 Port Power Cord ConnectorVideo Out Audio In/OutNetwork Port Alarm Input/OutputFactory Reset Switch RS485 PortOperation Instruction Esc Button Front Panel ControlsMenu Button Copy ButtonArrow Buttons Power LEDPlay/Stop Button Camera ButtonsSequence Button Remote Control ButtonsLogin/Logout Button ID ButtonZoom Button Alarm ButtonPlayback Buttons Layout ButtonTurning on the Power Initial Unit SetupPTZ Control Buttons Setup Screen System SetupInformation Information setup screen Date/Time Date/Time setup screenStorage Holiday setup screenStorage device UserUser setup screen EZ Setup screen EZ SetupDate/Time Setup Internet Connection Recording Setup ShutdownRecord Record Settings screen Schedule Schedule setup screenPre-Event Schedule Settings Advanced Mode setup screenAlarm-In Event SetupMotion Detection Alarm-In Actions 1 screenMotion Detection Settings screen Motion Detection Actions 1 screen Video LossVideo Blind Video Loss Settings screenDVR checks to see if anything is blinding a camera Text-In Text-In Settings screenText-In Actions screen System EventHighlight the Storage tab, and the Storage screen displays Event Status Check Alarm-In and Check Recording will beNetwork Network SetupHighlight the LAN tab, and the LAN screen displays Dvrns setup screen Notification Rtsp setup screenHighlight the + and press the button to add a mail recipient Notification SNS setup screen Camera Devices SetupHighlight the PTZ tab, and the PTZ setup screen displays Audio Alarm-OutDigital Deterrent Display OSD screen DisplayMain Monitor screen Remote Control setup screen Remote ControlOperation Instruction Live Monitoring Menu Live MonitoringFreeze Alarm Active Cameo Mode Zoom ModePTZ Mode Event Monitoring Covert Camera Recording VideoRecording Audio Playing Recorded VideoSelect Playback Camera menu Searching VideoSearch Search MenuBookmark Data Source Event Log SearchRecord Table Search screen Record Table SearchCalendar Search Configuration Digital Deterrent section for more detailsMotion Search screen Motion SearchText-In Search screen Text-In SearchClip-Copy BookmarksOperation Instruction Preparing the USB hard disk drive in Windows USB Hard Disk Drive PreparationSearch Example Text-In Search ExamplesSpeco Remote Web Monitoring Mode Web Search Mode Operation Instruction Time Overlap Map of Screens System Log Notices TroubleshootingSpecifications Error Code NoticesStorage