You can set up holidays by highlighting + and pressing the 
button. The current date appears.
Highlight the month and day and change them by using the Up and Down arrow buttons. Press the 
button to add the date. Dates can be deleted by highlighting the 
beside the date and pressing the 
button.
NOTE: Holidays that do not fall on the same date each year should be updated once the current year’s holiday has passed.
Figure 11 — Holiday setup screen.
Highlighting the Time Sync. tab causes the Time Sync. screen to display. You can set up time synchronization between the DVR and standard time servers that are available in most time zones and countries, or between the DVR and another DVR.
Figure 12 — Time Sync. screen.
Highlight the box beside Automatic Sync. and press the 
button. This toggles between On and Off.
Highlight the box beside Time Server and press the 
button. A virtual keyboard appears that you can use to enter the IP address or domain name of the time server. Highlighting 
allows you to select your time server from a list of registered time servers.
NOTE: You can use the domain name instead of IP address if you already set up the DNS Server when setting up the LAN.
Highlight the box beside Interval and press the 
button. Set the time interval for synchronization from 30 minutes to 1 day at various time intervals.
Last
Highlight Run as Server and press the 
button. Pressing the 
button toggles between On and Off. When it is On, the DVR you are setting up will run as a time server.
Storage
Highlight Storage in the System menu and press the information about the DVR’s storage devices.
button. The Storage setup screen appears and displays
The information in the Type column describes the storage device.
The capacity of the storage device is displayed in the Capacity column.
The Format column displays whether the device is used for recording (Record) or not (Not Using). Not formatted indicates the device is not formatted.
Figure 13 — Storage Information screen.
15