Speco Technologies Troubleshooting and Factory Reset Guide for DVR

16-Channel Digital Video Recorder

Troubleshooting

Problem	Possible Solution
No Power	 Check power cord connections.
	 Confirm that there is power at the outlet.
	 Check camera video cable and connections.
No Live Video	 Check monitor video cable and connections.
	 Confirm that the camera has power.
	 Check camera lens settings.
DVR has stopped recording	If hard disk drive is full, you will either need to delete video or set the DVR to the
	Overwrite Mode.
The icon displays,	When the DVR is in the Pre-Event recording mode, the yellow	and display when
however, the DVR is not	there is no event, and the DVR is not recording. The red and	display when any
recording.	event occurs and the DVR starts recording.
While upgrading the system,	If the current system version is higher than the upgrade package file version, you
the DVR keeps rebooting and	should reset the DVR first using the Factory Reset. When using the Factory Reset,
the upgrade fails.	you will lose any settings you have saved.

System Log Notices

Boot Up	Panic Off
Shutdown	Clear All Data
Restart	Clear Disk
Upgrade	Format Disk
Upgrade Fail	Disk Full
Power Failure	Disk Config Change
Time Change	Disk ‘No’: ‘serial number’
Time Zone Change	Disk ‘No’: Removed
Time Sync	Auto Deletion
Time Sync Fail	Search Begin
Disk Bad	Search End
Login	Clip-Copy Begin
Logout	Clip-Copy End
Setup Begin	Clip-Copy Cancel
Setup End	Clip-Copy Fail
Remote Setup Change	Clip-Copy User:
Remote Setup Fail	Clip-Copy From:
Setup Imported	Clip-Copy To:
Setup Import Failure	Clip-Copy Duration of Video:
Setup Exported	Clip-Copy Camera:
Setup Export Failure	Callback Fail
Setup Export Cancel	Import Digital Deterrent file complete
Schedule On	Import Digital Deterrent file error
Schedule Off	Export Digital Deterrent file complete
Panic On	Export Digital Deterrent file error

73