Speco Technologies CS16 manual Pre-Event, Schedule Settings Advanced Mode setup screen

Page 32

Operation Instruction

When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the icon displays at the top-left corner of the screen. The DVR follows the Event settings and the icon displays.

Highlight the box under the Channels heading and press the button to select which cameras will be recorded. (Simple Mode Only)

Highlight the box under the Settings heading and press the button to define the recording settings.

You can set the ips, Quality and Resolution (ips, Quality, Resolution and Dwell for Advanced Mode setup) of the recording for any modes you set up in the Mode column. If you do not set the ips, Quality, Resolution and Dwell in the Settings column, the DVR will follow the default settings. See below for details.

NOTE: Descriptions of the Record icons in the Type column are as follows:

Time-lapse (Time)

Alarm-In

Motion

Video Loss

Video Blind

Text-In

Figure 24 — Schedule – Settings (Advanced Mode) setup screen.

NOTE: Day, Range and Channels that are not defined will use the setting values of the previous schedule item.

When more than two schedule items are registered in the same day and time range, the DVR will follow the latest registered schedule item.

When multiple events are detected at the same time from a specific channel, the DVR will record event video with the high setting values if the ips, Quality, Resolution and Dwell values of events are different from each other. However, the ips will be reset to the supported maximum value when the ips, Quality, Resolution and Dwell are all set to the highest value. (Advanced Mode Only)

Highlight the box under the heading and press the button to delete the recording settings. You will be asked to confirm that you want to delete the settings.

Highlight Default… and press the button. The Default screen appears.

Highlighting boxes under ips and pressing the button allows you to set the images per second for Time and Event recording. You can select from 1.00 to 30.00 ips (25.00 ips PAL).

Highlighting boxes under Quality and pressing the button allows you to set the recorded image quality for Time and Event recording. You can select from: Very High, High, Standard and Basic.

Highlighting boxes under Resolution and pressing the button allows you to set the recorded image resolution for Time and Event recording. You can select from: Very High (D1), High (Half D1) and Standard (CIF).

Highlighting boxes under Dwell and pressing the button allows you to set the length of time you would like to record for the associated event. (Advanced Mode Only)

Pre-Event

Highlight Pre-Eventin the Record menu and press the button, and the Pre-Eventsetup screen appears. If you do not have Event set up in the Record Schedule, a message will display alerting you to this fact.

24

Image 32
Contents Page Page Compliance Notice of FCC Weee Waste Electrical & Electronic Equipment Table of Contents Digital Deterrent List of Illustrations Motion Detection Settings screen Feature Technical OverviewTypical DVR installation Package Contents Required Installation ToolsPower Cord Connector Video OutAudio In/Out RS232 PortAlarm Input/Output Factory Reset SwitchRS485 Port Network PortOperation Instruction Front Panel Controls Menu ButtonCopy Button Esc ButtonPower LED Play/Stop ButtonCamera Buttons Arrow ButtonsRemote Control Buttons Login/Logout ButtonID Button Sequence ButtonAlarm Button Playback ButtonsLayout Button Zoom ButtonPTZ Control Buttons Turning on the PowerInitial Unit Setup Information Setup ScreenSystem Setup Information setup screen Date/Time setup screen Date/TimeHoliday setup screen StorageUser Storage deviceUser setup screen EZ Setup EZ Setup screenDate/Time Setup Internet Connection Record Recording SetupShutdown Record Settings screen Schedule setup screen ScheduleSchedule Settings Advanced Mode setup screen Pre-EventEvent Setup Alarm-InAlarm-In Actions 1 screen Motion DetectionMotion Detection Settings screen Video Loss Motion Detection Actions 1 screenVideo Loss Settings screen Video BlindDVR checks to see if anything is blinding a camera Text-In Settings screen Text-InSystem Event Text-In Actions screenHighlight the Storage tab, and the Storage screen displays Check Alarm-In and Check Recording will be Event StatusNetwork Setup NetworkHighlight the LAN tab, and the LAN screen displays Dvrns setup screen Rtsp setup screen NotificationHighlight the + and press the button to add a mail recipient Notification SNS setup screen Devices Setup CameraHighlight the PTZ tab, and the PTZ setup screen displays Alarm-Out AudioDigital Deterrent Display Display OSD screenMain Monitor screen Remote Control Remote Control setup screenOperation Instruction Live Monitoring Live Monitoring MenuFreeze Alarm PTZ Mode Active Cameo ModeZoom Mode Event Monitoring Recording Video Recording AudioPlaying Recorded Video Covert CameraSearching Video Select Playback Camera menuSearch Menu SearchBookmark Event Log Search Data SourceRecord Table Search Record Table Search screenConfiguration Digital Deterrent section for more details Calendar SearchMotion Search Motion Search screenText-In Search Text-In Search screenBookmarks Clip-CopyOperation Instruction USB Hard Disk Drive Preparation Preparing the USB hard disk drive in WindowsText-In Search Examples Search ExampleSpeco Remote Web Monitoring Mode Web Search Mode Operation Instruction Time Overlap Map of Screens Troubleshooting System Log NoticesError Code Notices SpecificationsStorage