DVRNS Setup
Use DVR Name Service: Select the box to use the DVR Name Service.
DVRNS Server: Enter the IP address or domain name of the DVRNS server.
Port: Set the port number of the DVRNS server.
Use NAT: Select the box to use the NAT (Network Address Translation) device.
DVR Name: Enter the DVR name to be registered on the DVRNS server.
Check: Select the box to check whether or not the name you entered can be used.
NOTE: The DVR name you entered should be checked by selecting Check, otherwise the DVRNS changes will not be saved.
When entering no name or a name already registered on the DVRNS server, an error message displays.
Select the Finish button to finish the EZ Setup.
Shutdown
Highlight Shutdown in the System menu and press the 
button. The Shutdown screen displays asking you to confirm whether or not you want to shut the system down.
After selecting Shutdown and pressing the 
button, a screen will appear telling you when it is safe to disconnect power.
Figure 19 — Shutdown screen.
Recording Setup
Figure 20 — Record menu.
Record
Highlight Record in the Record menu and press the 
button. The Record setup screen appears.
21