MANUAL CLOCK SETTING
TV OPERATION
You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to “8:30 AM”, 29th (FRI) March, 2002.
1To turn on the TV/VCR, press the POWER button.
2Adjust the volume level by pressing the VOLUME Up or Down button. The volume level will be
indicated on the screen by green
ENGLISH
1Press the MENU button.
Press the SET/TRACKING + or – button to select the SYSTEM
2Press the SET/TRACKING + or – button to select the CLOCK SET option, then press the ENTER button.
3Press the SET/TRACKING + or – button to set the month, then press the ENTER button.
4Set the day, year and time as in step 3.
After setting the clock, time and date, the time starts functioning automati- cally.
M E N U
TIMER REC SET
TV
CH
AUTO REPEAT ON 
OFF 
SYSTEM
〈
SYSTEM
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK ON OFF
STANDARD TIME 
DAYLIGHT SAVING TIME
〈
CLOCK SET
MONTH | 3 |
|
DAY | 1 | (WED) |
YEAR | 2000 | |
TIME | 12 | : 00 AM |
〈
CLOCK SET |
|
|
MONTH | 3 |
|
DAY | 29 | (FRI) |
YEAR | 2002 | |
TIME | 8 | : 30 AM |
〈
bars. As the volume levelVOLUME32 increases, so do the number of
bars. If the volume decreases, the number of green bars also decreases.
3Set the TV/CATV menu option to the appropriate position (See page 15).
TV | - VHF/UHF Channels |
CATV | - CABLE TV Channels |
|
|
VHF/UHF/CATV CHANNELS
TV | CATV | ||
VHF | VHF | ||
UHF | STD/HRC/IRC | ||
| (A) (W) | ||
| |||
| (AAA) (ZZZ) | ||
|
| (86) (94) | |
| |||
|
| (100)(125) | |
| 01 | (5A) | |
4 Press the Direct Channel selection buttons to select |
the channel. |
• TV mode direct channel selection |
When the TV/CATV menu option is in the TV |
position, all channels can be instantly selected by |
8:30 AM FRI
NOTES: • After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the present time again if the Auto Clock did not set correctly.
•To move cursor backward, press the CANCEL button.
| using two buttons (for example, to select channel 2, | |
| press "0", then "2". If you press only "2", channel | |
| selection will be delayed for a few seconds). For | |
| channels 10 and above, press the 2 digits in order. | |
• | CATV mode direct channel selection | |
| When the TV/CATV menu option is in the CATV | |
| position, channels can be selected as follows: | |
• | TO SELECT CATV CHANNELS: | |
| Press "0" twice, then | |
|
| Example, to select channel 2, press "002". |
| Press "0", then the remaining 2 digits. | |
|
| Example, to select channel 12, press "012". |
| Press the 2 digits in order. | |
|
| Example, to select channel 36, press "36". |
| Press the 3 digits in order. | |
|
| Example, to select channel 120, press "120". |
NOTE FOR CHANNELS
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
CH 012
NOTES: • If a channel with no broadcast is selected, the sound will automatically be muted.
• If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
13
5A30301A E | 13 | 04/10/2001, 18:01 |