Marantz PV6111W manual Convergence Adjust, Repeat steps 1 and 2, Energy Save setting on

Page 53

Setup (Continued)

CONVERGENCE ADJUST

Your Rear Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called “convergence”.

Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the Rear Projection TV. If you move your Rear Projection TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors.

Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the green tube is stationary. The outputs of the red and blue tubes can be adjusted.

To simplify convergence, this Rear Projection TV incorporates a feature to allow you to display a test pattern of horizontal and vertical lines at nine different locations on the screen. Simply use the remote control to adjust the red and blue colors to match the green.

POWER DTV VCR/ DVD/

STB TV CATV

PERSONAL PREFERENCE

A B C D

	ENTER
	VOL	CH
	MENU
	AV MODE
	MUTE
		INPUT
		ANT-A/B
		DISPLAY
		ENT. FLASHBACK
	TWIN	Q-SOUND
	PICTURE	Q-SOUND
	CH	VIEW
	CH	MODE
		MODE
	INPUT	TITLE
	REW	FF

CH/SKIP PAUSE STOP REC

VCR/DVD

DDFCPOWER

1	Repeat steps 1 and 2 of the			LANGUAGE
1	ENERGY SAVE setting on			LANGUAGE
				SETUP
	page 52.			GRAY SCREEN
				ENERGY SAVE	SELECT
				CONVER.ADJ.	NEXT
	Press	or	to move the	INPUT MODE	BACK
	Press	or	to move the	CH/INPUT ID	MENU EXIT
	“ ” mark to “CONVER. ADJ.”
2	Press ENTER	or	to	ON
				:CONVER.ADJ.
				OFF
	access the CONVER. ADJ. mode.

	SELECT
	ENTER
	BACK
MENU	EXIT

3	Press	or	to select
	“ON” and then press		ENTER	or

Red

to display nine crosshatches.

4 Use , , or to move the red cross in the center

to match it to the green cross.Red

• When adjusting convergence, always start at the center of the screen.

•Four lines surrounding a crosshatch indicate the point being adjusted. The color of these surrounding lines indicates the color being adjusted.

53

Image 53

Contents Model PV6111W User Guide Contents Important Information Public Viewing of Copyrighted Material Picture Burn PreventionS2898A Main Features Before Operating Your Rear Projection TV Supplied AccessoriesBefore Operating Your Rear Projection TV Type of connector Universal Remote ControlAntenna Connections AntennasConnection with Converter/Descrambler Box without VCR Connection with Antenna Cable and VCR Connection with Antenna Cable To open the cover Main UnitInfrared Transmitter Window Power Basic Remote Control FunctionsName of button Operation EZ Setup on First Power On Menu screen Press Menu to access MainMenu Functions You can adjust the screen size. See pages 31 ~ Menu Summary TIMER/CLOCKClock SET TIMER/CLOCK Sleep Time TV-ON Time To exit PressClosed Caption How to set Closed CaptionCursor to CC Closed Caption Cursor to an item you want to setPress Enter or To access Video AdjustVideo mode Menu screen and then useMark to PRO ADJ. mode PRO AdjustAccess the PRO ADJ. mode Then press Enter orVideo NR To set other PRO adjustmentsOPC optical control Press or to select On or OFF, and then pressAudio Adjust Adjust Other Audio SettingsMark to an item e.g Equisound you want toTo access the MTS MTS/SAP Select modeCursor to MTS and then press ModeScreen adjustment items vary depending on Screen size mode Screen AdjustCursor to Screen Press or to adjust Vertical position, then pressMpaa Rating Example Parent Control V-CHIP operationExample 1.2 Age-Based setting Example 1.1 Age-Based settingExample 2.1 Content-Based setting Example 2.2 Content-Based settingCursor to Parent Ctrl How to Set V-CHIPParent Control First Setting Mpaa Rating Rating on TV RatingRepeat steps 1 to 4 of Mpaa Additional mode OTHERS, then press Repeat steps 3 to 5 for other settings you want to adjustUse To move Cursor to an item e.g Canadian English you wantRepeat steps 1 to 4 of Mpaa Turn on V-CHIP BlockRating on Mark to StatusDisplayed Chip Block temporarily will be canceledPress Enter Input Secret No. will be V-CHIP select mode will be displayed Enter the 4-digit Secret No. by using Direct Access ~Repeat the configuration of the V-CHIP Block on Repeat steps 1 to 2 of Mpaa Rating onView Timer Parent Control View TimerTo set Status Press To move Mark to StatusTo on to turn on the View If you want to set OFF TIME, select OFF Time in stepAIR/CABLE Setting Channel SetupCursor to CH Setup CH Setup modeCH Search mode Cable Setting onSaving Broadcast TV channels to memory Channel Search Repeat steps 1 to 3 of AIRCH Memory mode Setting onRepeat steps 1 to 3 of AIR/CABLE Mark to CH MemoryFavorites Favorites modeTo move Mark to the desired Position To input the channel number Into the memoryUNIV. Plus mode Cable Setting onUniversal Plus Function Repeat steps 1 to 3 of AIRCursor to Setup SetupSET UP mode Language modeCursor to on Gray ScreenEnergy Save Energy Save setting on Convergence AdjustAccess the CONVER. ADJ. mode Repeat steps 1 and 2Then Use Move the blue cross to match it to Access the Input Mode Input ModePress Enter or Press To select Instrument HD/DVDCH/INPUT ID Changing Screen Size Press ModeSelecting Ddfc Mode Selecting Ddfc Mode or AV ModeSelecting AV Mode 540PView two Screens Twin Picture Screen Multi-screen FunctionPress Picture to make the left part Screen become larger To return to the initialFunction. By changing a full screen into Making Notes From the Program Content Freeze ScreenPress Freeze Freeze function serves as a memo Press Search to display 3-SEARCH Screen Searching for a Program on a Different Channel Search ScreenRight screens Twin picture displayPress Swap to interchange the left Using Your Remote With Your Rear Projection TV Using your Remote control with a DTV STB DecoderTo Identify Your VCR Direct Entry Method How to Identify a VCRTips on Identifying your VCR through the Search method VCR Brand Remote Control Code Number While holding Press On your remote control How to Identify a DVD PlayerTo Identify Your DVD player -Direct Entry Method Press and the button lightsIdentifying your DTV STB through the Search method How to Identify a DTV STB Digital TV Set-Top BoxTo Identify Your DTV STB -Direct Entry Method Make sure STB lamp goes out and then release both buttonsTo Identify Your Cable Converter -Direct Entry Method How to Identify a Cable ConverterIdentifying your Cable Converter through the Search method Specifications Connecting video equipment for video playback Using the Video and Audio Input JacksVideo playback Using the Audio Output Jacks Quick Service Check List Problem Before Calling for ServiceSección de control delantera Unidad PrincipalBotones de selecció n del modo del control remoto Funciones Básicas del Control RemotoAntes de llamar al Servicio de Reparaciones ProblemaUnité Principale Commandes avantCapteur INFRA-ROUGE Fonctions de Base de la TélécommandeListe DE Vérification Rapide Problème Avant de faire appel au Service Après-venteDimensions for Installation Page Page Page Limited Warranty for the Marantz Rear Projection Television