Your TV includes a feature called SRS (O)* (Sound Retrieval System) which brings dimensional realism to both stereo and mono broadcasts.
When the SRS ON/OFF function is set to ON and the STEREO/SAP function is set to STEREO, your TV electronically increases the audio separation of the speakers so you can perceive a more spacious stereo sound effect. If a Stereo signal is not present, you can set the SRS ON/OFF function to its SYNTH STEREO setting to
-Turning OnSRS (0)
1.Repeatedly press the MENUopROG button to select AUDIO MENU, press +, and then repeatedly press MENU°PROG again to select SRS
•ON/OFF function.
3.Press MENUopROG button to select next menu item called SRS WIDTH. Pressing + or - will change the setting between NORMAL and ENHANCED. Try both settings and select the one you prefer.
synthesize and process the mono signal.
When the SRS ON/OFF function is set to ON, you can also change the next menu item called SRS WIDTH between NORMAL or ENHANCED. When this function is set to ENHANCED, the perceived audio separation will be greater. Try both settings and select the one you prefer for your room acoustics.
Note: Some material (audio) will be more affected than others.
SRS (0) allows you to hear multiple sound sources. Audio frequencies are processed to establish directional cues which gives the impression that sound is coming from all parts of the room. External speakers are not required, but the addition of high quality external speakers optimizes the sound performance of your 'IV.
*SRS, Sound Retrieval System, and the SRS logo (e,) are registered wademazks of SRS Labs, Inc.
Note: You can also change the
SRS:ON/OFF function between ON and
OFF without going through the menu by pressing the SRS button on the remote.
2.Repeatedly press the + button to change the setting between OFF, ON, and SYNTH STEREO.
Note: After turning SRS or synthetic stereo on, you may find it desirable to readjust the VOLUME, BASS, and TREBLE controls to optimize the sound. The SRS effect, tonal balance, and volume level will waryfrom channel to channel depending on the production qualities of the program'material.
•If the broadcast you are receiving is stereo audio, select ON. The STEREO/SAP function must be set to STEREO before you can hear SRS (0) sound with this setting.
°If the broadcast you are receiving is mono audio, select SYNTH STEREO.
•If you do not want SRS (O), select OFF.
17