The digital remote control that came packed with your TV controls your TV
-Programming Remote To Control Other Brands of VCRs
and up to two compatible VCRs, including most models of most other brands.
To program the remote, press and hold VCR1 (or VCR2oLD) and the
Note About Controlling Two VCRs •
•This remote can control two VCRs independently as long as each VCR operates on a different remote transmitting code.
•Some newer VCRs are capable of working on either of two remote codes. These VCRs have either a switch labeled VCR1/VCR2 or
an
•Some older VCRs have a NORM/UNIFIED
switch that can also respond to either the VCR1 or VCR2.LD button on the remote.
Place this switch in the UNIFIED position fox the VCR to respond to the VCR1 button or in the NORM position for the VCR2.LD button. In the NORM position; you must
program the VCR2*LD button to respond to code number 05.
•If neither of your VCRs have switchable
code capabilities, you still may be able to use the VCR1/VCR2 feature to control two
VCRs of the same brand since many older VCRs use remote codes that are different
than newer VCRs. You may want to experiment to see what works with your p_u'ticular VCRs:
Aiwa | ! | 15 | |
Akai | 03,17,22,23,63,66 | ||
Audio Dynamics | ........................... | 14,16 | |
Broksonic |
| 10 | |
Candle | 07,09,13,44,45,46,52 | ||
Canon | ................ | 08,53 | |
Capehart |
| 01 | |
Citizen | 07,09,13,44,45,46,52 | ||
Craig |
| 07,12 | |
Curtis Mathes | ................... | 00,07,08,14, I | |
..................................... | 5,44,46,53,64,67 | ||
dbx |
| 14,16 | |
Electrohome |
| :27 | |
Emerson | 208,09,10,13,15,20,23,27, | ||
.......... 34,41,42,47,49,57,62,65,67,68,70 | |||
Fisher | =.... | 02,12,18,19,43,48,58 | |
Ftmai |
| 15 | |
GE | 00,07,08,32,53 | ||
Goldstar | 09,14,46,60 | ||
Hitachi | 05,15,35,36 | ||
JCPenney | 02,05,07,08,14,1 | ||
................... | 6,30,35,51,53 | ||
. Refer to the chart below to find the
code number that corresponds to the brand name of your VCR. Keep this number in mind. If more than
one number is listed, you may need
to try each one separately until you find the one that works.
. Press and hold the VCR1 or VCR2.LD button on remote
(depending on which button you
want to program for that VCR).
You can program each button to control a different VCR.
. Press two number buttons (fin'stone, then the other) to enter the code number for your brand of VCR. Note: Youmust press the two number buttons while holding the VCR1 or VCR2.LD button.
. Point the remote at the VCR and
press the POWER button to test the code number. If nothing happens, try pressing VCR1 or VCR2.LD (whichever button you are programming).
•If the right number was entered, the VCR should turn on.
•If the VCR does not react to the
remote, repeat steps 1 thru 4 with another code number.
JVC ...., ........ .............. 02,14,16,30,46,74
Kenwood | 02,14,16,30,44,46 | |
Magnavox | 08,29,53,56 | |
Marantz | 02,08,14,16,29,30,44,46,61 | |
Malta | 09 | |
Memorex | 08,09,12,15 | |
MGA | 04,27 | |
Minolta | 05,35 | |
Mitsubishi | 04,05,27,35,40 | |
Montgomery | Ward | ............................. 06 |
Multitech | 07,15,31,32 | |
NEC | 02,14, I6,30,44,46,59,61,64 | |
Panasonic | 08,53,75 | |
Pentax | 05,35,44 | |
Philco | 08,29,53,56 | |
Philips | :..08,29 | |
Pioneer | 05,16,33 | |
ProScan | 00 | |
Quasar | 08,53 | |
RCA | 00,05,07,08,28,35,37,54,69 | |
Realistic | 02,06,08,09,12,1 | |
.......................................... | 5,19,27,43,53 | |
Note: Some older VCRs do not have an
POWER switch on their remote controls
and cannot be turned on and off
remotely, iffyou have this type of VCR, you can test the code number b'y pressing the CHAN button instead of the POWER button. Make sure the VCR is
already turned on when you test the code number.
Operating Notes:
•After the remote is programmed, it will turn on the VCR whenever you press
VCR1 (or VCR2.LD) and then POWER,
Some VCRs turn on automatically when you press VCR1 or VCR2.LD.
•You'll be able to control the VCR whenever the remote is in the "VCR
mode". To put the remote in the "VCR mode", press the VCR1 or VCR2.LD
button (depending on which button you
programmed). The other VCR buttons (such as PLAY, PAUSE, STOP REI_, FE and REC) 'will control the VCR when the remote is in the "VCR mode".
•To turn off the VCR, press VCR1 (or
VCR2.LD), then POWER.
•You may need to reprogram the remote
when you change the batteries. Try not to press any buttons when changing
batteries.
*Depending on the age, brand, model, and
type of equipment, some models .may not be able to respond to the remote.
Samsung | 2 | 07,13,22,32,42 | |
Sanyo |
| .02,12 | |
Scott |
| 04,13,41,49,68 | |
Sears | 02,05,09,12,18,19,35,43,4g | ||
Sharp |
| 06,24,27,39,45 | |
Shintom |
| 17,26,31,55 | |
Sony |
| 17,26,38 | |
Sylvania | 08,15,29,53,56 | ||
Symphonic |
| 15 | |
Tashiko |
| 09 | |
Tatung |
| 30 | |
Teac |
| 15,30,69 | |
Tecnics |
| 08 | |
Teknika | : | 08,09,15,21 | |
Toshiba |
| 05,13,19,48,49 | |
Vector Research | 14,16,44 | ||
Video Concepts | . ............. 14,16,44 | ||
Wards |
| 05,06,07,08,09,12, | |
................................... |
| 13,15,25,27,31,35 | |
Yamaha | i.. .............. 02,14,16,30,46 | ||
Zenith |
| 11,17,26,72 | |
Note: Refer to the information sheet packed with your remote control for the latest list of brand names and Code numbers. Because this list is constandy growing, the
intormation sheet packed with yourremotecontrol may be a
38