Programming Remote to Control, Audio Equipment

The digital remote control that came packed with your TV is also capable of controlling a compatible audio component.

To program the remote press and hold the AUDIO button and then enter the two-digit c.ode number for your brand of audio equipment.

-Programming Remote to Control

1.Refer to the chart below to find the code number that corresponds to the brand name of your audio

equipment. If more than one number is listed, you may need to

try each one separately to find the one that works.

2.Press and hold the AUDIO button on remote (depending on which button you want to program).

1 Press two number buttons (first one, then the other) to enter the code number for your brand of audio equipment.

Note: You must press the two number buttons while holding the AUDIO button.

4.Point the remote at the audio

equipment and press the POWER button to test the code number.

•If the right number was entered, the audio equipment will turn on.

•If the audio equipment does not react to the remote, repeat steps 1 thru 4 with another code number.

Audio Equipment

Operating Notes:

After the AUDIO button is programmed, the buttons described below will operate the basic functions of the audio equipment. Depending on the age, brand, model, and type of audio equipment, some models may not be able to respond to all the function buttons listed below. You will want to experiment with each button to determine the exact function for your component.

•POWER: Press to turn on component. Press again to turn off. Some components

will turn on automatically when you press this button.

•VOL: Press to change volume level.

•CHAN: Press to select the next higher or lower channel in the component's channel memory.

•Number Buttons: Press two numbers to directly select a channel.

•PLAY: Press to start component playing.

•PAUSE: Press to pause play or record. To release pause, press again.

•STOP: Press to stop whatever the

component is doing: playing, recording, rewinding, etc.

•REW (Rewind): Press while component is stopped to rewind tape.

•FF (Fast Forward): Press while component is stopped to fast forward tape.

• REC (Record): Press to start recording.

•ANTENNA: Performs various functions depending on the type of equipment. Experiment with this button.

Note: Refer to the information sheet packed with your remote control for the latest list of brand names and code numbers. Because this list of brand names is continually growing, the information sheet packed with your remote control may be a later version of this list and contain additional brands and/or code numbers.