Pioneer PDP 503CMX, PDP 433CMX Installation and Connections, Installation of the Unit

Page 16

Installation and Connections

English

Installation and Connections

Installation of the Unit

Installation using the supplied display stand

Be sure to fix the supplied stand to the installation surface.

Use commercially available M8 bolts that are 25 mm longer than the thickness of the installation surface.

1Fix the supplied stand to the installation surface at each of the 4 prepared holes using commercially available M8 bolts .

Front

PDP-503CMX: 798 mm (31-7/16in.)

PDP-433CMX: 768 mm (30-1/4in.)

Rear

110 mm (4-5/16in.)

2 Set this unit in the stand.

3 Fix this unit using the supplied washer and bolt.

Use a 6 mm hex wrench to bolt them.

CAUTION

This display unit weighs at least 67 lbs (30 kg) and has little front- to-back depth, making it very unstable when stood on edge. As a result, two or more persons should cooperate when unpacking, moving, or installing the display.

Image 16

Contents PDP-503CMXPDP-433CMX English Operating Instructions Safety Precautions Safety PrecautionsImportant Safety Instructions Iii Contents Features How to Use This Manual Before ProceedingScreen Displays Example of PDP-503CMX Screen DisplayPress 5/∞/2/3 to adjust the value Press 5/∞ to select the item to be adjustedAbout operations in this manual Before Proceeding Press Menu to display the menu screenChecking Supplied Accessories Part Names and Functions Main UnitMain unit Operation panel on the main unitInserting the batteries Remote control unit Remote Control UnitWhen handling the remote control unit Operating range of the remote control unit Connection PanelIllustration depicts PDP-503CMX model ~ Speaker L terminalAudio Input Stereo mini jack Audio Output Stereo mini jackInstallation and Connections Installation of the UnitInstallation using the supplied display stand Installation and ConnectionsWall-mount installation of the unit Rear view diagram PDP-503CMXRear view diagram PDP-433CMX Side view diagramWhen connecting to INPUT2 Connection to INPUT1 and INPUT2Connection to a personal computer Connection of separate Sync analog RGB SourceWhen connecting to INPUT2 When connecting to Output INPUT1 When connecting to INPUT1Connection of G on Sync analog RGB source Connecting the speakers Audio ConnectionsConnection of composite Sync analog RGB Source Making connections to the audio inputs on this unitPower Cord Connection Control Cord ConnectionTo attach the speed clamps to the main unit How to Route CablesTo remove speed clamps Setting Up the System Setup after ConnectionScreen Mode setup Press 2/3 to select SET UPClamp Position setup Setup of Clamp PositionSetting Up the System Press SET to select LockedPress STANDBY/ON to put this unit in the operation mode OperationsSelecting an Input Source Before you begin, make sure you haveTo adjust the volume Press Volume on the remote control unitPress Muting on the remote control unit Press Display on the remote control unitDuring personal computer signal input Screen Size SelectionChanging the screen size Press Screen Size to select the sizeMoving the screen position upward or downward Supported only on PDP-503CMXPartial Image Enlargement Automatic Power OFF Press 5/∞ to select either the PowerManagement or Auto Power OFF mode When using InputAdjusting the Picture Quality Display Panel AdjustmentsTo reset Picture mode settings to the default Adjusting the Image Position and Clock Automatic Adjustment Display Panel AdjustmentsTo reset Screen mode settings to the default Other Operations Rewriting the Input DisplayOther Operations Press SET to select Input LabelPower Control Function Press SET to select Power ControlPress 2/3 to select Option Press MenuOther Operations Press SET to select Input Audio Output Audio OUTPress 5/∞ to select Audio OUT Cleaning TroubleshootingAbout the self diagnosis mode Additional InformationGeneral problems Problems commonly mistaken as breakdownPanel sticking and after-image lag STANDBY/ON indicatorAdditional cautions Accessories General PDP-503CMXGeneral PDP-433CMX Input/outputPC signal compatibilty table INPUT1, INPUT2 Supplement 1 -1/2 PDP-503CMXInformation AdditionalSupplement 1 -2/2 PDP-433CMX Supplement Explanation of Terms Pin No Input Output