Pioneer PDP 503CMX, PDP 433CMX How to Route Cables, To attach the speed clamps to the main unit

Page 22

English

Installation and Connections

How to Route Cables

Speed clamps and bead bands are included with this unit for bunching cables together. Once components are connected, follow the following steps to route cables.

* As viewed from the rear of the display.

1

2

and Connections

1Organize cables together using the provided speed clamps.

Insert 1 into an appropriate hole on the rear of the unit, then snap 2 into the back of 1 to fix the clamp.

Speed clamps are designed to be difficult to undo once in place. Please attach carefully.

2Bunch separated cables together and secure them with the provided bead bands.

Note

Cables can be routed to the right or left.

Installation

To attach the speed clamps to the main unit

Connect the speed clamps using the 4 holes marked with • below, depending on the situation.

Illustration depicts PDP-503CMX model.

To remove speed clamps

Using pliers, twist the clamp 90° and pull it outward. In some cases the clamp may have deteriorated over time and may be damaged when removed.

16

En

Image 22

Contents PDP-503CMXPDP-433CMX English Operating Instructions Safety Precautions Safety PrecautionsImportant Safety Instructions Iii Contents Features Screen Displays How to Use This ManualBefore Proceeding Example of PDP-503CMX Screen DisplayAbout operations in this manual Press 5/∞/2/3 to adjust the valuePress 5/∞ to select the item to be adjusted Before Proceeding Press Menu to display the menu screenChecking Supplied Accessories Main unit Part Names and FunctionsMain Unit Operation panel on the main unitInserting the batteries Remote control unit Remote Control UnitWhen handling the remote control unit Operating range of the remote control unit Connection PanelAudio Input Stereo mini jack Illustration depicts PDP-503CMX model~ Speaker L terminal Audio Output Stereo mini jackInstallation using the supplied display stand Installation and ConnectionsInstallation of the Unit Installation and ConnectionsRear view diagram PDP-433CMX Wall-mount installation of the unitRear view diagram PDP-503CMX Side view diagramConnection to a personal computer When connecting to INPUT2Connection to INPUT1 and INPUT2 Connection of separate Sync analog RGB SourceWhen connecting to INPUT2 When connecting to Output INPUT1 When connecting to INPUT1Connection of G on Sync analog RGB source Connection of composite Sync analog RGB Source Connecting the speakersAudio Connections Making connections to the audio inputs on this unitPower Cord Connection Control Cord ConnectionTo attach the speed clamps to the main unit How to Route CablesTo remove speed clamps Screen Mode setup Setting Up the SystemSetup after Connection Press 2/3 to select SET UPSetting Up the System Clamp Position setupSetup of Clamp Position Press SET to select LockedSelecting an Input Source Press STANDBY/ON to put this unit in the operation modeOperations Before you begin, make sure you havePress Muting on the remote control unit To adjust the volumePress Volume on the remote control unit Press Display on the remote control unitChanging the screen size During personal computer signal inputScreen Size Selection Press Screen Size to select the sizeMoving the screen position upward or downward Supported only on PDP-503CMXPartial Image Enlargement Management or Auto Power OFF mode Automatic Power OFFPress 5/∞ to select either the Power When using InputAdjusting the Picture Quality Display Panel AdjustmentsTo reset Picture mode settings to the default Adjusting the Image Position and Clock Automatic Adjustment Display Panel AdjustmentsTo reset Screen mode settings to the default Other Operations Other OperationsRewriting the Input Display Press SET to select Input LabelPress 2/3 to select Option Power Control FunctionPress SET to select Power Control Press MenuOther Operations Press SET to select Input Audio Output Audio OUTPress 5/∞ to select Audio OUT About the self diagnosis mode CleaningTroubleshooting Additional InformationGeneral problems Problems commonly mistaken as breakdownPanel sticking and after-image lag STANDBY/ON indicatorAdditional cautions General PDP-433CMX AccessoriesGeneral PDP-503CMX Input/outputInformation PC signal compatibilty table INPUT1, INPUT2Supplement 1 -1/2 PDP-503CMX AdditionalSupplement 1 -2/2 PDP-433CMX Supplement Explanation of Terms Pin No Input Output