Panasonic WJ-ND400 manual HDD bay slots, RAID mode switch RAID, Removal knob

Page 14

ND400_Basic.book 14 ページ 2008年4月8日 火曜日 午後3時59分

Major Operating Controls and Their Functions

(5) HDD bay slots

Up to 9 HDD can be installed (one HDD unit is installed at the factory).

Note:

Limiting factors for the RAID5/RAID6 mode.

RAID5 mode

: The RAID5 mode can be used when

 

more than three HDDs are installed.

RAID6 mode

: The RAID6 mode can be used when

 

more than four HDDs are installed.

 

 

(6) RAID mode switch [RAID]

Switches the HDD operational mode (Single, RAID5, or RAID6).

The settings become effective after setting the HDD operation mode with the [RAID] switch and turning on the power while holding down the [USE] button to boot up.

S

: SINGLE mode (default)

R5

: RAID5 mode

R6

: RAID6 mode

Important:

The HDD operation mode cannot be changed once the system is operating. Recorded data may not be read correctly when the mode is changed after the system is operating.

(7) Removal knob

Used when replacing the HDD units.

14

Image 14
Contents Network Disk Recorder Installation Guide Model No. WJ-ND400For Your Safety Please Read the Following Text CARE- Fully This Class a digital apparatus complies with Canadian Ices ND400Basic.book 4 ページ 2008年4月8日 火曜日 午後3時59分 Contents Contents AttachmentsPreface About these Operating InstructionsNetwork Security System Requirements for a PCTrademarks and Registered Trademarks Precautions Place the unit horizontally on a level surface Indication labelHandle the unit with care MPEG-4 Visual patent portfolio license GPL/LGPLMajor Operating Controls and Their Functions Front ViewMajor Operating Controls and Their Functions Inside the Front Cover HDD access indicator A/FHDD status indicator STS USE button USERemoval knob RAID mode switch RAIDHDD bay slots Using the Brace Rear ViewHDD Space Management Outline of FunctionsMega Pixel Camera Compatibility and Capacity Replace HDDsEncrypting Data Recorded on the HDDs HDD Fault Tolerance SystemOutline of Functions Stable recording and playback of images Setting SchedulesRecording and Playing Images Event FunctionsEvent operations include the following Setup Menu ListList of Functions Live MonitoringNetwork Security Function NetworkRemote Operation SD Memory Recording Maintenance Version UpgradeRecording Rate Setting Acquiring images stored on the SD memory cardSetup Procedure Getting StartedRack Mounting Setting up the RackInstall the recorder in the rack Remove the 5 rubber feet from the underside of the recorderSetting up the Rack Rack mounting positionsConnections Connecting the PC and the CameraUsing a HUB for Direct Connection Port OperationND400Basic.book 26 ページ 2008年4月8日 火曜日 午後3時59分 Connecting to a PC over Adsl Example of Connectivity with 1 Port OperationConnecting multiple units to the recorder HubhubExample of Connectivity with 2 Port Operation HUB WANND400Basic.book 30 ページ 2008年4月8日 火曜日 午後3時59分 Connecting the Extension Unit Secure connection cablePin Assignments About ConnectorsUsing the Alarm/Control connector Pin Name Description of Operation Remarks NumberAuto Adjustment Time Function Connection About ConnectorsConnectivity for Switching to External Recording Connectivity for Emergency RecordingSignal ground Time adjustment input Connectivity for Control OutputUninterruptible Power Supply UPS Connectivity Using the Alarm Connector Alarm Connectivity Connectors Active Time Remarks Turning Off the Power Power SupplyTurning On the Power During RecordingUsing the Front Panel for Operations Basic OperationsUsing the Front Panel for Operations Checking System InformationCamera port Client PC port Maintenance port Checking the IP AddressConfiguring the Settings for Each Item Setting the IP AddressSetting and Canceling Key Lock Click the SET button when the cursor isHDD Unit Use the two screws to fasten the bottom of the HDDHandling the HDD ReferencePress the USE button for over 2 seconds Installing HDDsHDD is automatically recognized Check the available disk space Installing HDDs by unitInstall the HDD units in the extension unit Removing HDDs Remove the HDD unit Check the disk informationOpen the lever Remove the HDD unit Removing HDDs by unitPress the knob on the HDD unit Turn off the recorder Setting the HDDs Operation ModeHold down the USE button and turn on the power to boot up HDD Error Recovery During RAID Operation Data source During HDD error malfunction During recoveryReplacing Faulty HDD during RAID Operation Rebooting Problem Check item/remedy TroubleshootingProblems Troubleshooting WJ-ND400 SpecificationsGeneral Specifications Input/outputAccessories Standard AccessoriesIndex AdslPanasonic Canada Inc For European and other fields Panasonic Sales Company
Related manuals
Manual 233 pages 11.08 Kb

WJ-ND400 specifications

The Panasonic WJ-ND400 is a robust network video recorder (NVR) designed for reliable and scalable surveillance solutions. It serves as a central component in a modern security system, enabling the management and storage of video data from IP cameras. This device is particularly well-suited for a variety of applications, ranging from small retail setups to large enterprise installations.

One of the key features of the WJ-ND400 is its impressive storage capacity, supporting up to 16 terabytes of internal storage. This allows for extended recording times and the ability to retain high-resolution video footage without sacrificing quality. It supports various video compression formats, such as H.264 and H.265, which optimize file sizes and bandwidth use while maintaining clarity.

The WJ-ND400 boasts an intuitive user interface that facilitates seamless configuration and management of the recording settings. Users can access the device through a web browser, providing a convenient way to monitor live feeds, playback recorded footage, and manage camera settings from anywhere with an internet connection. This remote access feature is critical for businesses that require flexible surveillance management.

In terms of connectivity, the NVR supports Power over Ethernet (PoE), allowing for simplified installations by reducing the need for additional power supplies for IP cameras. The WJ-ND400 also utilizes a 10/100/1000 BASE-T Ethernet interface that ensures high-speed data transfer, optimizing the performance of connected devices.

Moreover, the WJ-ND400 is compatible with a wide range of Panasonic IP cameras, enhancing its versatility within a surveillance setup. It supports up to 64 channels of video input, enabling integration of multiple cameras for comprehensive coverage of surveillance areas.

Advanced features include motion detection and scheduled recording, allowing users to customize recording parameters based on specific needs. The NVR can also provide event alerts and notifications, enhancing its capability to respond to security incidents in real time.

In conclusion, the Panasonic WJ-ND400 stands out for its powerful storage capabilities, user-friendly interface, and extensive compatibility with various cameras. Its efficient use of high-quality video compression, combined with robust networking features, makes it an optimal choice for organizations looking to enhance their security infrastructure.