Panasonic WJ-ND400 manual Installing HDDs by unit, Install the HDD units in the extension unit

Page 47

ND400_Basic.book 47 ページ 2008年4月8日 火曜日 午後3時59分

Using the Front Panel for Operations

11 Select [YES] with the arrow buttons (left or right) and then press the [SET] button.

Installing HDDs by unit

All the HDDs in one extension unit can be linked to operate at the same time. For details refer to the operating instructions for the extension unit.

The HDD is recognized for recording.

Press the [SET] button to return to the display format screen.

12 Close the front cover and lock it by lightly pressing and turning the key to the left.

Keep the key in a safe place.

1 Install the HDD units in the extension unit.

Install the HDDs in the extension unit according to steps 1 to 2 in "Installing HDDs (page 46)" to install HDDs.

Repeat steps 1 to 2 to install multiple HDD units.

Note:

When installing HDD units, each HDD unit must be recognized. (Follow Step 1 and 2)

Additional HDD units will not be recognized while the first unit is being recognized.

(2)

(1)

13 Check the available disk space.

Check the following content related to the HDD under [Disk information] on the settings menu. Refer to the Setup Instructions (PDF file) for more information.

HDD capacity

HDD remaining capacity

Hour meter

Disk operation mode

Date range of video recorded on the HDD

Note:

HDDs cannot be added while in RAID5 or RAID6 mode.

The RAID function will not start even if an HDD is installed (linked) in an empty disk slot.

2

3

4

5

6

The HDD is automatically recognized.

While the HDD is being recognized, the HDD status indicator blinks orange.

Once the HDD is recognized, the HDD status indicator lights green or blinks.

The HDD is automatically formatted if it is not preformatted.

The HDD status indicator lights green after formatting is complete.

Preformatted HDDs are recognized for playback only. In this case, the HDD status indicator blinks green. Follow the instructions from step 3 to use the HDD for recording.

Press the [USE] button for over 2 seconds.

A buzzer sounds.

Press the front panel buttons according to the directions on the LCD.

Press the arrow buttons (up or down) on the front panel until [HDD Operate] appears on the screen.

Press the [SET] button.

Press the arrow buttons (up or down) on the front panel until [Link EXT] appears on the screen.

47

Image 47
Contents Model No. WJ-ND400 Network Disk Recorder Installation GuideFor Your Safety Please Read the Following Text CARE- Fully This Class a digital apparatus complies with Canadian Ices ND400Basic.book 4 ページ 2008年4月8日 火曜日 午後3時59分 Contents Attachments ContentsAbout these Operating Instructions PrefaceNetwork Security System Requirements for a PCTrademarks and Registered Trademarks Precautions MPEG-4 Visual patent portfolio license GPL/LGPL Indication labelHandle the unit with care Place the unit horizontally on a level surfaceFront View Major Operating Controls and Their FunctionsMajor Operating Controls and Their Functions USE button USE HDD access indicator A/FHDD status indicator STS Inside the Front CoverRemoval knob RAID mode switch RAIDHDD bay slots Rear View Using the BraceReplace HDDs Outline of FunctionsMega Pixel Camera Compatibility and Capacity HDD Space ManagementEncrypting Data Recorded on the HDDs HDD Fault Tolerance SystemOutline of Functions Event Functions Setting SchedulesRecording and Playing Images Stable recording and playback of imagesLive Monitoring Setup Menu ListList of Functions Event operations include the followingNetwork Security Function NetworkRemote Operation Acquiring images stored on the SD memory card Maintenance Version UpgradeRecording Rate Setting SD Memory RecordingGetting Started Setup ProcedureRemove the 5 rubber feet from the underside of the recorder Setting up the RackInstall the recorder in the rack Rack MountingRack mounting positions Setting up the RackPort Operation Connecting the PC and the CameraUsing a HUB for Direct Connection ConnectionsND400Basic.book 26 ページ 2008年4月8日 火曜日 午後3時59分 Example of Connectivity with 1 Port Operation Connecting to a PC over AdslHubhub Connecting multiple units to the recorderHUB WAN Example of Connectivity with 2 Port OperationND400Basic.book 30 ページ 2008年4月8日 火曜日 午後3時59分 Secure connection cable Connecting the Extension UnitPin Name Description of Operation Remarks Number About ConnectorsUsing the Alarm/Control connector Pin AssignmentsConnectivity for Emergency Recording About ConnectorsConnectivity for Switching to External Recording Auto Adjustment Time Function ConnectionConnectivity for Control Output Signal ground Time adjustment inputUninterruptible Power Supply UPS Connectivity Using the Alarm Connector Alarm Connectivity Connectors Active Time Remarks During Recording Power SupplyTurning On the Power Turning Off the PowerBasic Operations Using the Front Panel for OperationsChecking System Information Using the Front Panel for OperationsChecking the IP Address Camera port Client PC port Maintenance portClick the SET button when the cursor is Setting the IP AddressSetting and Canceling Key Lock Configuring the Settings for Each ItemUse the two screws to fasten the bottom of the HDD HDD UnitReference Handling the HDDPress the USE button for over 2 seconds Installing HDDsHDD is automatically recognized Check the available disk space Installing HDDs by unitInstall the HDD units in the extension unit Removing HDDs Check the disk information Remove the HDD unitOpen the lever Remove the HDD unit Removing HDDs by unitPress the knob on the HDD unit Turn off the recorder Setting the HDDs Operation ModeHold down the USE button and turn on the power to boot up Data source During HDD error malfunction During recovery HDD Error Recovery During RAID OperationReplacing Faulty HDD during RAID Operation Rebooting Problem Check item/remedy TroubleshootingProblems Troubleshooting Input/output SpecificationsGeneral Specifications WJ-ND400Standard Accessories AccessoriesAdsl IndexPanasonic Sales Company Panasonic Canada Inc For European and other fields
Related manuals
Manual 233 pages 11.08 Kb

WJ-ND400 specifications

The Panasonic WJ-ND400 is a robust network video recorder (NVR) designed for reliable and scalable surveillance solutions. It serves as a central component in a modern security system, enabling the management and storage of video data from IP cameras. This device is particularly well-suited for a variety of applications, ranging from small retail setups to large enterprise installations.

One of the key features of the WJ-ND400 is its impressive storage capacity, supporting up to 16 terabytes of internal storage. This allows for extended recording times and the ability to retain high-resolution video footage without sacrificing quality. It supports various video compression formats, such as H.264 and H.265, which optimize file sizes and bandwidth use while maintaining clarity.

The WJ-ND400 boasts an intuitive user interface that facilitates seamless configuration and management of the recording settings. Users can access the device through a web browser, providing a convenient way to monitor live feeds, playback recorded footage, and manage camera settings from anywhere with an internet connection. This remote access feature is critical for businesses that require flexible surveillance management.

In terms of connectivity, the NVR supports Power over Ethernet (PoE), allowing for simplified installations by reducing the need for additional power supplies for IP cameras. The WJ-ND400 also utilizes a 10/100/1000 BASE-T Ethernet interface that ensures high-speed data transfer, optimizing the performance of connected devices.

Moreover, the WJ-ND400 is compatible with a wide range of Panasonic IP cameras, enhancing its versatility within a surveillance setup. It supports up to 64 channels of video input, enabling integration of multiple cameras for comprehensive coverage of surveillance areas.

Advanced features include motion detection and scheduled recording, allowing users to customize recording parameters based on specific needs. The NVR can also provide event alerts and notifications, enhancing its capability to respond to security incidents in real time.

In conclusion, the Panasonic WJ-ND400 stands out for its powerful storage capabilities, user-friendly interface, and extensive compatibility with various cameras. Its efficient use of high-quality video compression, combined with robust networking features, makes it an optimal choice for organizations looking to enhance their security infrastructure.