Panasonic WJ-ND400 manual About Connectors, Connectivity for Emergency Recording

Page 33

ND400_Basic.book 33 ページ 2008年4月8日 火曜日 午後3時59分

 

 

 

 

About Connectors

 

 

 

 

 

 

 

 

 

 

 

 

 

Pin

Name

Description of Operation

Remarks

 

 

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

22

Alarm suspension input

The state of alarm suspension is assumed

Non-voltage make contact input 5V

 

 

 

 

according to the signal input.

pull-up 150 kΩ

 

 

 

 

 

 

 

 

23

Outage detection input

Start of outage processing according to the signal

 

 

 

 

 

input.

 

 

 

 

 

 

 

 

 

24

External recording mode

Changeover to the external recording mode

 

 

 

 

switching input

 

 

 

 

 

 

 

 

 

 

25

+5 V output

+5 V output

200 mA max.

 

 

 

 

 

 

 

Connectivity for Emergency Recording

Turning [On] the external switch starts emergency recording.

Emergency recording operations differ depending on the [Emergency rec.] settings accessed through the Setup menu (refer to Setup Instructions (PDF file)).

(Signal ground)

(Emergency recording input)

13 12

External switch

ALARM/CONTROL

Connectivity for Switching to External Recording

Turning [On] the external switch, records by switching the program.

Set the recording program in [Time table setup (Ext.)] under [Time table] on the settings menu (refer to Setup Instructions (PDF file)).

(Signal ground)

(External recording mode switching)

13 24

External switch

ALARM/CONTROL

Auto Adjustment Time Function Connection 1

When settings menu - [Basic] - [Time & date] - [Auto adjustment time] is set to [Master]

[Time Adjust Output] is available and the time on other devices is synchronized with the recorder.

When the time set under [Activation time] is reached, a signal is output from the Time adjustment input/output (pin no. 20).

Terminal for other devices

(Signal ground)

(Time adjustment output)

13 20

Signal ground

Sensor input

Alarm Input

Alarm reset input

Series recording input

Time adjustment input

Signal ground

Alarm output

Alarm restore output

Front panel LED monitor output

Alarm recording

Recording

Disk

 

 

 

Buzzer output

System error output

Temperature warning output

Time adjustment output

Series recording output

ALARM/CONTROL

33

Image 33
Contents Model No. WJ-ND400 Network Disk Recorder Installation GuideFor Your Safety Please Read the Following Text CARE- Fully This Class a digital apparatus complies with Canadian Ices ND400Basic.book 4 ページ 2008年4月8日 火曜日 午後3時59分 Contents Attachments ContentsAbout these Operating Instructions PrefaceSystem Requirements for a PC Trademarks and Registered TrademarksNetwork Security Precautions Handle the unit with care Indication labelPlace the unit horizontally on a level surface MPEG-4 Visual patent portfolio license GPL/LGPLFront View Major Operating Controls and Their FunctionsMajor Operating Controls and Their Functions HDD status indicator STS HDD access indicator A/FInside the Front Cover USE button USERAID mode switch RAID HDD bay slotsRemoval knob Rear View Using the BraceMega Pixel Camera Compatibility and Capacity Outline of FunctionsHDD Space Management Replace HDDsHDD Fault Tolerance System Outline of FunctionsEncrypting Data Recorded on the HDDs Recording and Playing Images Setting SchedulesStable recording and playback of images Event FunctionsList of Functions Setup Menu ListEvent operations include the following Live MonitoringNetwork Remote OperationNetwork Security Function Recording Rate Setting Maintenance Version UpgradeSD Memory Recording Acquiring images stored on the SD memory cardGetting Started Setup ProcedureInstall the recorder in the rack Setting up the RackRack Mounting Remove the 5 rubber feet from the underside of the recorderRack mounting positions Setting up the RackUsing a HUB for Direct Connection Connecting the PC and the CameraConnections Port OperationND400Basic.book 26 ページ 2008年4月8日 火曜日 午後3時59分 Example of Connectivity with 1 Port Operation Connecting to a PC over AdslHubhub Connecting multiple units to the recorderHUB WAN Example of Connectivity with 2 Port OperationND400Basic.book 30 ページ 2008年4月8日 火曜日 午後3時59分 Secure connection cable Connecting the Extension UnitUsing the Alarm/Control connector About ConnectorsPin Assignments Pin Name Description of Operation Remarks NumberConnectivity for Switching to External Recording About ConnectorsAuto Adjustment Time Function Connection Connectivity for Emergency RecordingConnectivity for Control Output Signal ground Time adjustment inputUninterruptible Power Supply UPS Connectivity Using the Alarm Connector Alarm Connectivity Connectors Active Time Remarks Turning On the Power Power SupplyTurning Off the Power During RecordingBasic Operations Using the Front Panel for OperationsChecking System Information Using the Front Panel for OperationsChecking the IP Address Camera port Client PC port Maintenance portSetting and Canceling Key Lock Setting the IP AddressConfiguring the Settings for Each Item Click the SET button when the cursor isUse the two screws to fasten the bottom of the HDD HDD UnitReference Handling the HDDInstalling HDDs HDD is automatically recognizedPress the USE button for over 2 seconds Installing HDDs by unit Install the HDD units in the extension unitCheck the available disk space Removing HDDs Check the disk information Remove the HDD unitRemoving HDDs by unit Press the knob on the HDD unitOpen the lever Remove the HDD unit Setting the HDDs Operation Mode Hold down the USE button and turn on the power to boot upTurn off the recorder Data source During HDD error malfunction During recovery HDD Error Recovery During RAID OperationReplacing Faulty HDD during RAID Operation Rebooting Troubleshooting ProblemsProblem Check item/remedy Troubleshooting General Specifications SpecificationsWJ-ND400 Input/outputStandard Accessories AccessoriesAdsl IndexPanasonic Sales Company Panasonic Canada Inc For European and other fields
Related manuals
Manual 233 pages 11.08 Kb

WJ-ND400 specifications

The Panasonic WJ-ND400 is a robust network video recorder (NVR) designed for reliable and scalable surveillance solutions. It serves as a central component in a modern security system, enabling the management and storage of video data from IP cameras. This device is particularly well-suited for a variety of applications, ranging from small retail setups to large enterprise installations.

One of the key features of the WJ-ND400 is its impressive storage capacity, supporting up to 16 terabytes of internal storage. This allows for extended recording times and the ability to retain high-resolution video footage without sacrificing quality. It supports various video compression formats, such as H.264 and H.265, which optimize file sizes and bandwidth use while maintaining clarity.

The WJ-ND400 boasts an intuitive user interface that facilitates seamless configuration and management of the recording settings. Users can access the device through a web browser, providing a convenient way to monitor live feeds, playback recorded footage, and manage camera settings from anywhere with an internet connection. This remote access feature is critical for businesses that require flexible surveillance management.

In terms of connectivity, the NVR supports Power over Ethernet (PoE), allowing for simplified installations by reducing the need for additional power supplies for IP cameras. The WJ-ND400 also utilizes a 10/100/1000 BASE-T Ethernet interface that ensures high-speed data transfer, optimizing the performance of connected devices.

Moreover, the WJ-ND400 is compatible with a wide range of Panasonic IP cameras, enhancing its versatility within a surveillance setup. It supports up to 64 channels of video input, enabling integration of multiple cameras for comprehensive coverage of surveillance areas.

Advanced features include motion detection and scheduled recording, allowing users to customize recording parameters based on specific needs. The NVR can also provide event alerts and notifications, enhancing its capability to respond to security incidents in real time.

In conclusion, the Panasonic WJ-ND400 stands out for its powerful storage capabilities, user-friendly interface, and extensive compatibility with various cameras. Its efficient use of high-quality video compression, combined with robust networking features, makes it an optimal choice for organizations looking to enhance their security infrastructure.