Panasonic WJ-ND400 List of Functions, Setup Menu List, Event operations include the following

Page 19

chap2.fm 19 ページ 2008年4月8日 火曜日 午後5時20分

Outline of Functions

Event operations include the following.

Start recording images

Recording is done according to the recording duration and rate settings on the settings menu. The images from a camera before an event occurs can be recorded and linked to the event (pre- record event).

Display alarm messages

A pop-up screen appears to indicate an event has occurred.

Alarm indicator blinks

Alarm indicator on the front of the recorder blinks.

Buzzer sounds

The buzzer sounds according to the settings on the settings menu.

The camera goes to its preset position.

The camera moves to a pre-registered preset position.

Notification email sent when event occurs

Alarm mail (notification of the time and date of an event) is sent to registered email addresses when an event occurs. An image can be attached to this email. Up to 4 addresses can be registered to receive the alarm mail.

Alarm signal output from the Alarm/Control connector on the rear panel of the recorder (Alarm output)

When an event occurs, a signal is output from the Alarm connector on the rear panel of the recorder to sound an alarm etc.

Event log is recorded.

When an event occurs, the type of event and the time it occurred are recorded in an event log.

Images recorded during events are transmitted to an FTP server. When an event occurs, images are recorded from when the event starts for a set period of time and are automatically transmitted to an FTP server.

A PC is notified of an alarm according to Panasonic alarm protocol settings.

When an event or error occurs, a PC is automatically notified regarding event or error information according to the [Panasonic alarm protocol] settings. Install the software (option) on the PC designated to receive and display event or error notification.

Refer to the "readme.txt" file on the CD-ROM for details about the software.

List of Functions

Live Monitoring

Function

Description

 

 

1-screen

Live images from cameras (including audio) are displayed on one screen.

 

The camera can be operated from the recorder when one screen is displayed (refer to the Operating

 

Instructions (PDF file)).

 

 

4-screen

Live images from a camera are displayed on multi-screen.

 

 

Sequential display

Images from multiple cameras are shown in preset sequence on the screen.

 

 

Recording

Function

Order of

Description

priority*

 

 

 

 

 

Emergency recording

1

Recording is done when an emergency occurs.

 

 

 

Event post recording

2

Recording is automatically done after various events occur.

 

 

 

Manual recording

3

Recording of images and audio can be started and stopped manually.

 

 

 

Schedule recording

4

Recording is done automatically during a set time period.

 

 

 

Pre-event recording

5

Recording is automatically done before various events occur.

 

 

 

* Order of priority: Images are recorded in the highest priority mode if more than one mode is enabled.

Setup Menu List

Refer to the Setup Instructions (PDF file) for information about the settings menu list.

19

Image 19
Contents Model No. WJ-ND400 Network Disk Recorder Installation GuideFor Your Safety Please Read the Following Text CARE- Fully This Class a digital apparatus complies with Canadian Ices ND400Basic.book 4 ページ 2008年4月8日 火曜日 午後3時59分 Contents Attachments ContentsAbout these Operating Instructions PrefaceTrademarks and Registered Trademarks System Requirements for a PCNetwork Security Precautions MPEG-4 Visual patent portfolio license GPL/LGPL Indication labelHandle the unit with care Place the unit horizontally on a level surfaceFront View Major Operating Controls and Their FunctionsMajor Operating Controls and Their Functions USE button USE HDD access indicator A/FHDD status indicator STS Inside the Front CoverHDD bay slots RAID mode switch RAIDRemoval knob Rear View Using the BraceReplace HDDs Outline of FunctionsMega Pixel Camera Compatibility and Capacity HDD Space ManagementOutline of Functions HDD Fault Tolerance SystemEncrypting Data Recorded on the HDDs Event Functions Setting SchedulesRecording and Playing Images Stable recording and playback of imagesLive Monitoring Setup Menu ListList of Functions Event operations include the followingRemote Operation NetworkNetwork Security Function Acquiring images stored on the SD memory card Maintenance Version UpgradeRecording Rate Setting SD Memory RecordingGetting Started Setup ProcedureRemove the 5 rubber feet from the underside of the recorder Setting up the RackInstall the recorder in the rack Rack MountingRack mounting positions Setting up the RackPort Operation Connecting the PC and the CameraUsing a HUB for Direct Connection ConnectionsND400Basic.book 26 ページ 2008年4月8日 火曜日 午後3時59分 Example of Connectivity with 1 Port Operation Connecting to a PC over AdslHubhub Connecting multiple units to the recorderHUB WAN Example of Connectivity with 2 Port OperationND400Basic.book 30 ページ 2008年4月8日 火曜日 午後3時59分 Secure connection cable Connecting the Extension UnitPin Name Description of Operation Remarks Number About ConnectorsUsing the Alarm/Control connector Pin AssignmentsConnectivity for Emergency Recording About ConnectorsConnectivity for Switching to External Recording Auto Adjustment Time Function ConnectionConnectivity for Control Output Signal ground Time adjustment inputUninterruptible Power Supply UPS Connectivity Using the Alarm Connector Alarm Connectivity Connectors Active Time Remarks During Recording Power SupplyTurning On the Power Turning Off the PowerBasic Operations Using the Front Panel for OperationsChecking System Information Using the Front Panel for OperationsChecking the IP Address Camera port Client PC port Maintenance portClick the SET button when the cursor is Setting the IP AddressSetting and Canceling Key Lock Configuring the Settings for Each ItemUse the two screws to fasten the bottom of the HDD HDD UnitReference Handling the HDDHDD is automatically recognized Installing HDDsPress the USE button for over 2 seconds Install the HDD units in the extension unit Installing HDDs by unitCheck the available disk space Removing HDDs Check the disk information Remove the HDD unitPress the knob on the HDD unit Removing HDDs by unitOpen the lever Remove the HDD unit Hold down the USE button and turn on the power to boot up Setting the HDDs Operation ModeTurn off the recorder Data source During HDD error malfunction During recovery HDD Error Recovery During RAID OperationReplacing Faulty HDD during RAID Operation Rebooting Problems TroubleshootingProblem Check item/remedy Troubleshooting Input/output SpecificationsGeneral Specifications WJ-ND400Standard Accessories AccessoriesAdsl IndexPanasonic Sales Company Panasonic Canada Inc For European and other fields
Related manuals
Manual 233 pages 11.08 Kb

WJ-ND400 specifications

The Panasonic WJ-ND400 is a robust network video recorder (NVR) designed for reliable and scalable surveillance solutions. It serves as a central component in a modern security system, enabling the management and storage of video data from IP cameras. This device is particularly well-suited for a variety of applications, ranging from small retail setups to large enterprise installations.

One of the key features of the WJ-ND400 is its impressive storage capacity, supporting up to 16 terabytes of internal storage. This allows for extended recording times and the ability to retain high-resolution video footage without sacrificing quality. It supports various video compression formats, such as H.264 and H.265, which optimize file sizes and bandwidth use while maintaining clarity.

The WJ-ND400 boasts an intuitive user interface that facilitates seamless configuration and management of the recording settings. Users can access the device through a web browser, providing a convenient way to monitor live feeds, playback recorded footage, and manage camera settings from anywhere with an internet connection. This remote access feature is critical for businesses that require flexible surveillance management.

In terms of connectivity, the NVR supports Power over Ethernet (PoE), allowing for simplified installations by reducing the need for additional power supplies for IP cameras. The WJ-ND400 also utilizes a 10/100/1000 BASE-T Ethernet interface that ensures high-speed data transfer, optimizing the performance of connected devices.

Moreover, the WJ-ND400 is compatible with a wide range of Panasonic IP cameras, enhancing its versatility within a surveillance setup. It supports up to 64 channels of video input, enabling integration of multiple cameras for comprehensive coverage of surveillance areas.

Advanced features include motion detection and scheduled recording, allowing users to customize recording parameters based on specific needs. The NVR can also provide event alerts and notifications, enhancing its capability to respond to security incidents in real time.

In conclusion, the Panasonic WJ-ND400 stands out for its powerful storage capabilities, user-friendly interface, and extensive compatibility with various cameras. Its efficient use of high-quality video compression, combined with robust networking features, makes it an optimal choice for organizations looking to enhance their security infrastructure.