Panasonic WJ-ND400 manual Remove the HDD unit, Check the disk information

Page 49

ND400_Basic.book 49 ページ 2008年4月8日 火曜日 午後3時59分

Using the Front Panel for Operations

9 Select [YES] with the arrow buttons (left or right) and then press the [SET] button.

The HDD stop process begins and the HDD status indicator blinks orange.

The HDD status indicator goes out once the HDD stop process is complete.

If you stop the HDD during recording, recording switches to another HDD. Images are not recorded for a few seconds while recording switches. If another HDD is not available, recording stops.

Press the [SET] button to return to the display format screen.

10 Remove the HDD unit.

(1)Press the knob on the HDD unit.

(2)Open the lever.

(3)Remove the HDD unit.

Remove the HDD carefully so you do not bump it (be careful not to drop it).

(1)

(3)

(2)

(2)

11 Close the front cover and lock it by lightly pressing and turning the key to the left.

Keep the key in a safe place.

12 Check the disk information.

Check the following content related to the HDD under [Disk information] on the settings menu. Refer to the Setup Instructions (PDF file) for more information.

HDD capacity

HDD remaining capacity

Hour meter

Disk operation mode

Date range of video recorded on the HDD

Note:

You cannot remove HDDs by opening the front panel while operating in RAID5 or RAID6 mode.

Refer to page 53 when replacing HDDs with errors.

(2)

(1)

49

Image 49
Contents Model No. WJ-ND400 Network Disk Recorder Installation GuideFor Your Safety Please Read the Following Text CARE- Fully This Class a digital apparatus complies with Canadian Ices ND400Basic.book 4 ページ 2008年4月8日 火曜日 午後3時59分 Contents Attachments ContentsAbout these Operating Instructions PrefaceTrademarks and Registered Trademarks System Requirements for a PCNetwork Security Precautions Handle the unit with care Indication labelPlace the unit horizontally on a level surface MPEG-4 Visual patent portfolio license GPL/LGPLFront View Major Operating Controls and Their FunctionsMajor Operating Controls and Their Functions HDD status indicator STS HDD access indicator A/FInside the Front Cover USE button USEHDD bay slots RAID mode switch RAIDRemoval knob Rear View Using the BraceMega Pixel Camera Compatibility and Capacity Outline of FunctionsHDD Space Management Replace HDDsOutline of Functions HDD Fault Tolerance SystemEncrypting Data Recorded on the HDDs Recording and Playing Images Setting SchedulesStable recording and playback of images Event FunctionsList of Functions Setup Menu ListEvent operations include the following Live MonitoringRemote Operation NetworkNetwork Security Function Recording Rate Setting Maintenance Version UpgradeSD Memory Recording Acquiring images stored on the SD memory cardGetting Started Setup ProcedureInstall the recorder in the rack Setting up the RackRack Mounting Remove the 5 rubber feet from the underside of the recorderRack mounting positions Setting up the RackUsing a HUB for Direct Connection Connecting the PC and the CameraConnections Port OperationND400Basic.book 26 ページ 2008年4月8日 火曜日 午後3時59分 Example of Connectivity with 1 Port Operation Connecting to a PC over AdslHubhub Connecting multiple units to the recorderHUB WAN Example of Connectivity with 2 Port OperationND400Basic.book 30 ページ 2008年4月8日 火曜日 午後3時59分 Secure connection cable Connecting the Extension UnitUsing the Alarm/Control connector About ConnectorsPin Assignments Pin Name Description of Operation Remarks NumberConnectivity for Switching to External Recording About ConnectorsAuto Adjustment Time Function Connection Connectivity for Emergency RecordingConnectivity for Control Output Signal ground Time adjustment inputUninterruptible Power Supply UPS Connectivity Using the Alarm Connector Alarm Connectivity Connectors Active Time Remarks Turning On the Power Power SupplyTurning Off the Power During RecordingBasic Operations Using the Front Panel for OperationsChecking System Information Using the Front Panel for OperationsChecking the IP Address Camera port Client PC port Maintenance portSetting and Canceling Key Lock Setting the IP AddressConfiguring the Settings for Each Item Click the SET button when the cursor isUse the two screws to fasten the bottom of the HDD HDD UnitReference Handling the HDDHDD is automatically recognized Installing HDDsPress the USE button for over 2 seconds Install the HDD units in the extension unit Installing HDDs by unitCheck the available disk space Removing HDDs Check the disk information Remove the HDD unitPress the knob on the HDD unit Removing HDDs by unitOpen the lever Remove the HDD unit Hold down the USE button and turn on the power to boot up Setting the HDDs Operation ModeTurn off the recorder Data source During HDD error malfunction During recovery HDD Error Recovery During RAID OperationReplacing Faulty HDD during RAID Operation Rebooting Problems TroubleshootingProblem Check item/remedy Troubleshooting General Specifications SpecificationsWJ-ND400 Input/outputStandard Accessories AccessoriesAdsl IndexPanasonic Sales Company Panasonic Canada Inc For European and other fields
Related manuals
Manual 233 pages 11.08 Kb

WJ-ND400 specifications

The Panasonic WJ-ND400 is a robust network video recorder (NVR) designed for reliable and scalable surveillance solutions. It serves as a central component in a modern security system, enabling the management and storage of video data from IP cameras. This device is particularly well-suited for a variety of applications, ranging from small retail setups to large enterprise installations.

One of the key features of the WJ-ND400 is its impressive storage capacity, supporting up to 16 terabytes of internal storage. This allows for extended recording times and the ability to retain high-resolution video footage without sacrificing quality. It supports various video compression formats, such as H.264 and H.265, which optimize file sizes and bandwidth use while maintaining clarity.

The WJ-ND400 boasts an intuitive user interface that facilitates seamless configuration and management of the recording settings. Users can access the device through a web browser, providing a convenient way to monitor live feeds, playback recorded footage, and manage camera settings from anywhere with an internet connection. This remote access feature is critical for businesses that require flexible surveillance management.

In terms of connectivity, the NVR supports Power over Ethernet (PoE), allowing for simplified installations by reducing the need for additional power supplies for IP cameras. The WJ-ND400 also utilizes a 10/100/1000 BASE-T Ethernet interface that ensures high-speed data transfer, optimizing the performance of connected devices.

Moreover, the WJ-ND400 is compatible with a wide range of Panasonic IP cameras, enhancing its versatility within a surveillance setup. It supports up to 64 channels of video input, enabling integration of multiple cameras for comprehensive coverage of surveillance areas.

Advanced features include motion detection and scheduled recording, allowing users to customize recording parameters based on specific needs. The NVR can also provide event alerts and notifications, enhancing its capability to respond to security incidents in real time.

In conclusion, the Panasonic WJ-ND400 stands out for its powerful storage capabilities, user-friendly interface, and extensive compatibility with various cameras. Its efficient use of high-quality video compression, combined with robust networking features, makes it an optimal choice for organizations looking to enhance their security infrastructure.