Panasonic WJ-ND400 manual Removing HDDs

Page 48

ND400_Basic.book 48 ページ 2008年4月8日 火曜日 午後3時59分

Using the Front Panel for Operations

7 Select [YES] with the arrow buttons (left or right) and then press the [SET] button.

8 Select the number of the extension unit where you installed the HDD with the arrow buttons (up or down) and press the [SET] button.

9 Select [YES] with the arrow buttons (left or right) and then press the [SET] button.

All the HDDs installed in the extension unit are recognized for recording.

Press the [SET] button to return to the display format screen.

10 Close the front cover of the extension unit and lock it by lightly pressing and turning the key to the left.

(2)

(1)

11 Check the available disk space.

Check the following content related to the HDD under [Disk information] on the settings menu. Refer to the Setup Instructions (PDF file) for more information.

HDD capacity

HDD remaining capacity

Hour meter

Disk operation mode

Date range of video recorded on the HDD

Removing HDDs

You can remove HDD units from the recorder while it is in operation.

1 Insert the key (included) into the key hole and turn it while pressing in gently to open the front cover.

(1)

(2)

2 Press the [USE] button for over 2 seconds.

A buzzer sounds.

Press the front panel buttons according to the directions on the LCD.

3 Press the arrow buttons (up or down) on the front panel until [HDD Operate] appears on the screen.

4 Press the [SET] button.

5 Press the arrow buttons (up or down) on the front panel until [Remove HDD] appears on the screen.

6 Select [YES] with the arrow buttons (left or right) and then press the [SET] button.

7 Select the HDD to be removed (Recorder: MAIN, Extension unit: EXT) with the arrow buttons (up or down) and then press the [SET] button.

8 Select the HDD to be removed with the arrow buttons (up or down) and then press the [SET] button.

48

Image 48
Contents Network Disk Recorder Installation Guide Model No. WJ-ND400For Your Safety Please Read the Following Text CARE- Fully This Class a digital apparatus complies with Canadian Ices ND400Basic.book 4 ページ 2008年4月8日 火曜日 午後3時59分 Contents Contents AttachmentsPreface About these Operating InstructionsSystem Requirements for a PC Trademarks and Registered TrademarksNetwork Security Precautions Indication label Handle the unit with carePlace the unit horizontally on a level surface MPEG-4 Visual patent portfolio license GPL/LGPLMajor Operating Controls and Their Functions Front ViewMajor Operating Controls and Their Functions HDD access indicator A/F HDD status indicator STSInside the Front Cover USE button USERAID mode switch RAID HDD bay slotsRemoval knob Using the Brace Rear ViewOutline of Functions Mega Pixel Camera Compatibility and CapacityHDD Space Management Replace HDDsHDD Fault Tolerance System Outline of FunctionsEncrypting Data Recorded on the HDDs Setting Schedules Recording and Playing ImagesStable recording and playback of images Event FunctionsSetup Menu List List of FunctionsEvent operations include the following Live MonitoringNetwork Remote OperationNetwork Security Function Maintenance Version Upgrade Recording Rate SettingSD Memory Recording Acquiring images stored on the SD memory cardSetup Procedure Getting StartedSetting up the Rack Install the recorder in the rackRack Mounting Remove the 5 rubber feet from the underside of the recorderSetting up the Rack Rack mounting positionsConnecting the PC and the Camera Using a HUB for Direct ConnectionConnections Port OperationND400Basic.book 26 ページ 2008年4月8日 火曜日 午後3時59分 Connecting to a PC over Adsl Example of Connectivity with 1 Port OperationConnecting multiple units to the recorder HubhubExample of Connectivity with 2 Port Operation HUB WANND400Basic.book 30 ページ 2008年4月8日 火曜日 午後3時59分 Connecting the Extension Unit Secure connection cableAbout Connectors Using the Alarm/Control connectorPin Assignments Pin Name Description of Operation Remarks NumberAbout Connectors Connectivity for Switching to External RecordingAuto Adjustment Time Function Connection Connectivity for Emergency RecordingSignal ground Time adjustment input Connectivity for Control OutputUninterruptible Power Supply UPS Connectivity Using the Alarm Connector Alarm Connectivity Connectors Active Time Remarks Power Supply Turning On the PowerTurning Off the Power During RecordingUsing the Front Panel for Operations Basic OperationsUsing the Front Panel for Operations Checking System InformationCamera port Client PC port Maintenance port Checking the IP AddressSetting the IP Address Setting and Canceling Key LockConfiguring the Settings for Each Item Click the SET button when the cursor isHDD Unit Use the two screws to fasten the bottom of the HDDHandling the HDD ReferenceInstalling HDDs HDD is automatically recognizedPress the USE button for over 2 seconds Installing HDDs by unit Install the HDD units in the extension unitCheck the available disk space Removing HDDs Remove the HDD unit Check the disk informationRemoving HDDs by unit Press the knob on the HDD unitOpen the lever Remove the HDD unit Setting the HDDs Operation Mode Hold down the USE button and turn on the power to boot upTurn off the recorder HDD Error Recovery During RAID Operation Data source During HDD error malfunction During recoveryReplacing Faulty HDD during RAID Operation Rebooting Troubleshooting ProblemsProblem Check item/remedy Troubleshooting Specifications General SpecificationsWJ-ND400 Input/outputAccessories Standard AccessoriesIndex AdslPanasonic Canada Inc For European and other fields Panasonic Sales Company
Related manuals
Manual 233 pages 11.08 Kb

WJ-ND400 specifications

The Panasonic WJ-ND400 is a robust network video recorder (NVR) designed for reliable and scalable surveillance solutions. It serves as a central component in a modern security system, enabling the management and storage of video data from IP cameras. This device is particularly well-suited for a variety of applications, ranging from small retail setups to large enterprise installations.

One of the key features of the WJ-ND400 is its impressive storage capacity, supporting up to 16 terabytes of internal storage. This allows for extended recording times and the ability to retain high-resolution video footage without sacrificing quality. It supports various video compression formats, such as H.264 and H.265, which optimize file sizes and bandwidth use while maintaining clarity.

The WJ-ND400 boasts an intuitive user interface that facilitates seamless configuration and management of the recording settings. Users can access the device through a web browser, providing a convenient way to monitor live feeds, playback recorded footage, and manage camera settings from anywhere with an internet connection. This remote access feature is critical for businesses that require flexible surveillance management.

In terms of connectivity, the NVR supports Power over Ethernet (PoE), allowing for simplified installations by reducing the need for additional power supplies for IP cameras. The WJ-ND400 also utilizes a 10/100/1000 BASE-T Ethernet interface that ensures high-speed data transfer, optimizing the performance of connected devices.

Moreover, the WJ-ND400 is compatible with a wide range of Panasonic IP cameras, enhancing its versatility within a surveillance setup. It supports up to 64 channels of video input, enabling integration of multiple cameras for comprehensive coverage of surveillance areas.

Advanced features include motion detection and scheduled recording, allowing users to customize recording parameters based on specific needs. The NVR can also provide event alerts and notifications, enhancing its capability to respond to security incidents in real time.

In conclusion, the Panasonic WJ-ND400 stands out for its powerful storage capabilities, user-friendly interface, and extensive compatibility with various cameras. Its efficient use of high-quality video compression, combined with robust networking features, makes it an optimal choice for organizations looking to enhance their security infrastructure.