RCA 7L400MDV manual Loading and Playing Discs, To Load and Play a Disc

Chapter 2: Playing Videocassettes and Discs

Loading and Playing Discs

Before you load a disc, make sure that it is compatible with the player. Note that the following discs CANNOT be used with this player:

•Laserdisc

•CD-I, CD-ROM, DVD-ROM

•MiniDisc

•CD-G discs play audio only, not graphics

To Load and Play a Disc

1.Lift up the LCD screen and position it to your liking.

2.Press the POWER button to turn on the unit.

3.Press the button on the top of the player to open the disc tray. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).

The player reads the disc’s table of contents, and then one of following happens depending on how the disc was programmed:

•No disc menu appears, a screen saver is displayed.

•The disc menu appears.

•The disc menu appears on the screen when you press PLAY/PAUSE.

•The disc starts playing automatically.

If no picture or screen saver is displayed, press the SOURCE button to put the player in DVD mode.

12 Chapter 2