Panasonic TY-ST42PF3 Attaching the display unit to the wall- hangingbracket, Wall-hanging bracket

Attaching the display unit to the wall- hangingbracket

1	Lift the display unit so that the upper insulating spacers at the back
	may fit into the notched indentation at the top of the wall-hanging
	bracket, and then lower the display unit into place.
2	After that, lift the display unit slightly and insert the lower insulating
	spacers at the back of the display unit into the lower cutouts in the
	wall-hanging bracket.
3	Then lower the display unit into the lower notched part of the cutouts.

1

2

3

Fixing screws

Insulating spacer

4 Insert and fasten the screws at both the left and right sides.

Wall-hanging bracket

Fixing screws mounts

Fixing screws(left and right)

Do not lift the display too high or it may come out of the notches in the upper indentations.

To prevent the display unit from becoming detached from the wall- hanging bracket, make sure that the left and right fixing screws are properly fitted.

Fixing screw (M5-35)

5-6