Panasonic TY-ST42PT3S How to use this manual, Some notes on how to read this manual, Other notes

Page 2

How to use this manual

Some notes on how to read this manual

In this manual, the number such as "1, 2, 3,..." appears to the left of each step.

Go ahead in numerical order.

Indicates a situation where incorrect handling may result in death or serious injury for the person performing the installation.

Indicates a situation where incorrect handling may result in breakdown or damage to physical objects.

Contains more detailed information than in the steps in the main text. Be sure to read the notes.

Other notes

More-detailed explanations and supplemental information for the installation procedures are given on the right. * Be sure to read not just the steps on the left, but the information on the right as well.

At the very beginning of the installation procedure, there are illustrations for assembling various accessory parts on the Wide Plasma Display. Refer to them when installing.

Each installation procedure for accessory parts is preceded by a brief description of the procedure. During the pro-cedure, refer to the description if necessary.

Each installation procedure for accessory parts is followed by an explanation of how to remove the Wide Plasma Display. Refer to this when it is necessary to remove the accessory parts from the Wide Plasma Display and reposition it.

Image 2
Contents Pedestal Other notes How to use this manualSome notes on how to read this manual Before installing Optional parts list Tools listAccessory list SpeakersWall stand Parts listPedestal Wall-hanging bracket angled Mobile standWall-hanging bracket vertical Speakers Points to note during installationCeiling unit Dimensions of the display unit Units mmPage Pedestal TY-ST42PT3S TY-ST42PT3KAttaching the pedestal to the display unit Instruction of the installationAssembling the pedestal ScrewsRear Fixing the display unit Fixing the display unit to a deskFront Fixing the display unit to the wall Wall stand TY-ST42PW1Installation diagram DescriptionAssembling the wall stand Display unit face down Fixing the insulating spacers to the display unitProvisionally tighten the fixing screws Remove the screws and coversRemove the four screws Screw through and , then screw the four to the display unitAttaching the wall stand to the display unit Base of the display unit as shown in the illustrationHolding bracket Fixing screws left and right Lower the display into placeRemoving the display unit Mobile stand TY-ST42PF31020 40 5/32 610 24 820 89 3 33/64 400 15 3/4Then fix them from below using the four bolts Assembling the mobile standFixing the display unit to the stand Display unit as shown in the illustration belowFixing the wiring Mounting holes in the rear of the supportRemoving the display unit Wall-hanging bracket vertical TY-WK42PV1930 100 660 490 450 320 610 69.5 450 900 1020Installation diagram For Multi Screen 120Fixing the wall-hanging bracket to the wall 930 450 490Into the holes UnitRemove the four screws from the display Fixing screwsleft and right Attaching the display unit to the wall- hanging bracketNotches Insultating spacer Bracket, and then lower the display unit into placeLift the display away from the wall-hanging bracket Fixing srews Lower insulating Left and right SpacerSpacers If UN Official Bracket is Used Wall-hanging bracket angled TY-WK42PR1450 900 1020 310930 100 660 490 450 Insert and fasten a M6 screw bolt into the center-top hole 5tilt 10tilt 15tilt 20tilt No tilt Adjusting the angle of the display fittingTilt No tilt Stay Screw bolts into the remaining five holesFixing the insulating spacers to the display Wall-hanging bracket Attaching the display unit to the wall- hangingbracketFixing screws Insulating spacer Fixing screws mountsFoxing screws Insulating spacer Left and right Lift the display unit slightlyCeling unit TY-CE42PS1431 Prepare the ceiling unit Assembling the ceiling unitFixing bolt M8-12 Ceiling unit Lower section Upper section Ceiling board Installation the ceiling unitInstalling to a wooden structureexample White line Hidden Side Quite los cuatro pernos Install the insulating spacers in the display unitPrepare the display Fixing screw M5 1 each Left and right sides Mount the display in the ceiling unitInsulating spacer Notch DownwardAdjust the ceiling units angle Connecting pipe Angle Adjustment Hole positions VerticalAdjust the ceiling units direction Fixing bolt M8-20Cable tie Gather the cablesInsulating Fixing screw M5 SpacerSpeakers TY-SP42PM3W TY-SP42PWD3WDo not suspend the speakers Safety Precautions10089 610 Left Speaker 89100 Right Speaker Attach the sponges to the speakers Sponges For right For leftHook Slot Rear of Wide Plasma Display Attach the speakers to the Wide Plasma DisplaySecure the speakers in place Bracket mounting screw Rear of Wide Plasma DisplayConnect the speaker cables Preparing the ends of the speaker cablesCentral P.O. Box 288, Osaka 530-8692, Japan
Related manuals
Manual 1 pages 52.7 Kb