Panasonic TY-SP42PWD3W Assembling the mobile stand, Then fix them from below using the four bolts

Instruction of the installation

	Assembling the mobile stand
1	Insert the supprots into the slots on the upper side of stand base, and
	then fix them from below using the four bolts.

2	Slide the shelf, with the supports in the slots, down to the required
	height. Choose the locations of stopper holes to match the required

height. Then fix the shelf using the four screws and spring washers.

Front

3 Insert the holder into the supports, and fix it with the four screws.

When installing the stand, provisionally fasten all bolts and screws first, and then fasten them to complete the assembly.

Bolt (M8)

Support

1

2

Choose the locations of the stopper holes to match the required height.

1)height of 500 mm

2)height of 350 mm

Assembly screw (M6-16) and spring washer x 4 each

Be sure to assemble on a stable horizontal surface.

Assembly screw(M5-15)

3-3