Panasonic TY-ST42PF3 Fixing bolt M8-20, Connecting pipe Angle Adjustment Hole positions Vertical

Page 51

4 Adjust the ceiling unit's direction.

Adjust the angle of the display and fix in place with two fixing bolts (M8-20, included).

Fixing bolt (M8-20)

5 Adjust the ceiling unit's angle.

This ceiling unit can be placed in 7 angles from 0° to 30° in 5° increments. The factory setting is 0° .

If you wish to change the angle, remove the angle adjustment screws from the connecting pipe and adjust the angle adjustment holes to the desired position. Then reinsert the screws.

	Connecting pipe	Angle
	Connecting pipe	adjustment
		adjustment
		hole positions
		0° (vertical)

5°

10°

15°

20°

25°

30°

Fixing bolt (M8-20) x 2

6-8

Image 51

Contents Pedestal How to use this manual Some notes on how to read this manualOther notes Before installing Tools list Optional parts listSpeakers Accessory listParts list PedestalWall stand Mobile stand Wall-hanging bracket verticalWall-hanging bracket angled Points to note during installation Ceiling unitSpeakers Units mm Dimensions of the display unitPage TY-ST42PT3S TY-ST42PT3K PedestalScrews Instruction of the installationAssembling the pedestal Attaching the pedestal to the display unitFixing the display unit Fixing the display unit to a desk FrontRear Fixing the display unit to the wall TY-ST42PW1 Wall standDescription Installation diagramAssembling the wall stand Remove the screws and covers Fixing the insulating spacers to the display unitProvisionally tighten the fixing screws Display unit face downScrew through and , then screw the four to the display unit Remove the four screwsBase of the display unit as shown in the illustration Attaching the wall stand to the display unitLower the display into place Holding bracket Fixing screws left and rightRemoving the display unit TY-ST42PF3 Mobile stand89 3 33/64 400 15 3/4 1020 40 5/32 610 24 820Assembling the mobile stand Then fix them from below using the four boltsDisplay unit as shown in the illustration below Fixing the display unit to the standMounting holes in the rear of the support Fixing the wiringRemoving the display unit TY-WK42PV1 Wall-hanging bracket vertical69.5 450 900 1020 930 100 660 490 450 320 610120 Installation diagram For Multi Screen930 450 490 Fixing the wall-hanging bracket to the wallUnit Remove the four screws from the displayInto the holes Bracket, and then lower the display unit into place Attaching the display unit to the wall- hanging bracketNotches Insultating spacer Fixing screwsleft and rightFixing srews Lower insulating Left and right Spacer SpacersLift the display away from the wall-hanging bracket If UN Official Bracket is Used TY-WK42PR1 Wall-hanging bracket angled310 930 100 660 490 450450 900 1020 Insert and fasten a M6 screw bolt into the center-top hole Screw bolts into the remaining five holes Adjusting the angle of the display fittingTilt No tilt Stay 5tilt 10tilt 15tilt 20tilt No tiltFixing the insulating spacers to the display Fixing screws mounts Attaching the display unit to the wall- hangingbracketFixing screws Insulating spacer Wall-hanging bracketLift the display unit slightly Foxing screws Insulating spacer Left and rightTY-CE42PS1 Celing unit431 Assembling the ceiling unit Fixing bolt M8-12 Ceiling unit Lower section Upper sectionPrepare the ceiling unit Installation the ceiling unit Installing to a wooden structureexampleCeiling board White line Hidden Side Install the insulating spacers in the display unit Prepare the displayQuite los cuatro pernos Downward Mount the display in the ceiling unitInsulating spacer Notch Fixing screw M5 1 each Left and right sidesFixing bolt M8-20 Connecting pipe Angle Adjustment Hole positions VerticalAdjust the ceiling units direction Adjust the ceiling units angleGather the cables Cable tieFixing screw M5 Spacer InsulatingTY-SP42PM3W TY-SP42PWD3W SpeakersSafety Precautions 10089 610 Left Speaker 89100 Right SpeakerDo not suspend the speakers Sponges For right For left Attach the sponges to the speakersBracket mounting screw Rear of Wide Plasma Display Attach the speakers to the Wide Plasma DisplaySecure the speakers in place Hook Slot Rear of Wide Plasma DisplayPreparing the ends of the speaker cables Connect the speaker cablesCentral P.O. Box 288, Osaka 530-8692, Japan

Related manuals

Manual 1 pages 52.7 Kb