IMPORTANT NOTES
Antenna/Cable Connection
A terrestrial antenna or cable antenna may be connected to the VHF/UHF IN jack of the Digital Satellite Receiver. This input works as a passthrough. The VHF/UHF channels can be passed through either by toggling TV/SAT button on remote control or by turning the Digital Satellite Receiver off. The RF output (VHF (SAT) UHF OUT) of the Digital Satellite Receiver must be connected to the television.
Antenna Connection
For proper reception of VHF/UHF channels, a directional antenna is required. For best reception, an outdoor antenna is recommended.
Procedure
ρConnect the antenna cable from your antenna to the VHF/UHF IN jack of the Digital Satellite Receiver.
Incoming Cable from
Home Antenna
75 Ohm ANT IN input on back of Digital Satellite Receiver
Cable Connection
Before connecting your cable to the Digital Satellite Receiver, contact your local cable provider and ask the following question:
•Do you need a separate cable box to receive cable channels in your area?
Procedure
ρConnect the cable wire provided by your local cable provider.
Incoming Cable from
Cable Provider
75 Ohm ANT IN input on back of Digital Satellite
Receiver
9