ROLLER GUIDE MENU OPERATIONS
Setup : Satellite Setup – Dish position
This screen allows you to position your Satellite antenna by having the Digital Satellite Receiver provide approximate values for elevation, azimuth and tilt (marked in degrees), after the you have entered your
qSat Setup
Sat Ports
Dish Pos
Sig Meter
Zip code for position | 92154 |
| |
Elevation |
|
| |
51 degrees |
| ||
|
|
| |
Azimuth | 166 degrees |
| |
Tilt | 101 degrees |
| |
|
|
|
|
Enter zip code, press ACTION
Press uto change the zip code.
Procedure
In Sat Setup menu, press displayed.
Press ubutton to enter your Zip code. Use the numeric keys on the Remote Control to input your zip code numbers. Press ubutton to move to the next position.
Press ACTION button to enter the new zip code. Elevation, Azimuth and Tilt are automatically
rdisplayed after you press the ACTION button.
This information should be used to properly align and position the satellite antenna. These values are approximations. Proper alignment should also be verified by using the signal strength meter.
Setup : Satellite Setup – Signal Meter
Since the Digital Satellite Receiver is capable of receiving satellite programming from multiple DIRECTV satellites, the user has the ability to choose one of 3 supported satellites to receive signal strength and is primarily used during the system
qSat Setup
Sat Ports
Dish Pos
Sig Meter
Satellite | A |
Transponder | 1 of 32 |
Signal strength 91% |
Press uto change satellite.
Signal Meter Screen
Procedure
In the Sat. Setup menu, press qbutton to highlight Signal Meter. Sub- menu is displayed. Press to highlight Satellite.
Press uto change Satellite
Press pqbuttons to select Satellite A, B or C. Press ACTION to enter the selection.
Press | button to highlight Transponder. |
Press | ubutton then pqbuttons to choose one of 32 transponders. Select the transponder |
rthat gives you a signal strength of 85%. Press ttwo times to return to SETUP menu.
39