Panasonic TZ-DRD100 Roller Guide Menu Operations, Setup Satellite Setup Dish Type

ROLLER GUIDE MENU OPERATIONS

Roller Guide Menu Operations

Setup

To help you with the initial set up of the Digital Satellite Receiver, the Setup menu is displayed automatically when the Digital Satellite Receiver is turned on for the first time. A setup wizard will help guide you through the procedure of setting up the proper satellite configurations, dish type, monitor and TV output setup. The Setup options will assist you to configure the DIRECTV signals so that the unit can receive the desired

video signals. Following are requirements that are needed to receive DIRECTV® programming.

	Setup Options
Option		Required for DIRECTV
Sat. Setup		Yes
Monitor		Yes
System Test		Yes
Access Card		Yes
TV Output		Yes

Setup : Satellite Setup – Dish Type

This menu lets you select the type of satellite dish that you have installed. If you have round dish, select Round and if you have oval shaped dish, select Oval.

qSat Set p			Dish Type		Oval
		Sat Ports			Sat A and B
	Dish Pos				Sat A, B and C
				Auto Configuration
	Sig Meter
			Warning: Satellite dish must be
			installed and positioned
			properly for auto configuration
			to function correctly.

Press uto for Dish Type, qfor port config.

Satellite Setup – Dish Type

Procedure

ρPress υ button to highlight Dish Type.

ρPress υ button to change Dish Type.

ρPress πθ to select either Round or Oval (Round is the default setting).

ρPress ACTION button to save the selection.

ρPress τ button once to return to Sat. Setup menu.

37