Panasonic TH-103PF10EK manual Adjusting Pos. /Size, Normalisation

Adjusting Pos. /Size

1

2

Press to display the Pos. /Size menu.

Press to select Auto Setup / H-Pos / H-Size / V-Pos /

V-Size / Dot Clock / Clock Phase / 1:1 Pixel Mode.

3

4

Press to adjust Pos. / Size.

Press to exit from adjust mode.

During “Video (S Video)”, “Digital”, “SDI” and “HDMI” input signal.

Pos. /Size

Normalise Normal

Auto Setup

H-Pos	0
H-Size	0
V-Pos	0
V-Size	0
1:1 Pixel Mode
		Off

Notes:

•Unadjustable items are grayed out.

Adjustable items differ depending on the input signal and the display mode.

•Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos./Size function.

•If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment.

During “Component”, “RGB” and “PC” input signal.

Pos. /Size
Normalise	Normal
Auto Setup		0
H-Pos
H-Size		0
V-Pos		0
V-Size		0
Dot Clock		0
Clock Phase		0
1:1 Pixel Mode		Off

Helpful Hint ( /

Normalise

Normalisation)

While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

19