Panasonic TH-103PF10EK manual Picture Adjustments, Normal, Dynamic, Super Cinema

Picture Adjustments

1		Press to display the Picture menu.
2	Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

		Picture		1/2			Press “ ” or “ ” button to switch between modes.
			Normal
	Normalise						Normal		Dynamic
	Picture Mode			Normal
							Super Cinema		Cinema
	Contrast			25
	Brightness			0			Normal
	Colour			0
	Hue			0			For viewing in	standard	(evening	lighting)
	Sharpness			5			environments.
							This menu selects the normal levels of Brightness
		Picture		2/2
							and Contrast.
	White balance			Normal
							Dynamic
	Colour Management				Off
							For viewing in brighter environments.
	Advanced settings				On
							This menu selects higher than normal levels of
			Press to select “On”.				Brightness and Contrast.
			Press to enter				Cinema
							Ideal for movies.
			Advanced settings .
							Super Cinema
	Advanced settings On						Displays velvety picture.
	Enables fine picture adjustment at a professional
	level (see next page).						Note:
							If you would like to change the picture and colour
		Advanced settings		1/2
							of the selected Picture menu to something else,
		Normalise Normal		0			adjust using the items in the Picture menu. (see
		Black extension					next page)
		Input level		0
		Gamma		2.2
		AGC				Off
							Press “ ” or “ ” button to switch between modes.
		Advanced settings		2/2
							Normal	Cool		Warm
		W/B High R		0
		W/B High G		0
		W/B High B		0
		W/B Low R		0			Colour Management On
		W/B Low G		0
							Enables vivid colour adjustment automatically.
		W/B Low B		0
Advanced settings Off
Displays images with settings of the Picture menu.

Helpful Hint ( /

Normalise

Normalisation)

While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

23