Panasonic TH-103PF10EK manual On-Screen Menu Displays, See page 23

On-Screen Menu Displays

To Picture adjust menu	The MENU button on the unit can also	1 Press to select.
(see page 23)
	be pressed.

Picture		1/2	- /
Normalise	Normal	Normal	MENU	Right side
Picture Mode
Contrast		25	INPUT	surface		[ from the unit ]
Brightness		0
Colour		0	Each time the MENU button is pressed,			Right side surface
Hue		0
Sharpness		5	the menu screen will switch.			2	ENTER/
			Normal Viewing	Picture	Setup
Picture		2/2					+ /
			Sound	Pos. /Size		1
							VOL
White balance		Normal					- /
Colour Management		Off
Advanced settings		On					MENU
						1 Press to select.
						2 Press to access each adjust
						screen.
	Press to select					Setup		1/2
	“On”.						Signal
						Component/RGB-in select

Press to enter			RGB
		Input label	PC
Advanced settings.		Power save	Off
		Standby save	Off
		Power management	Off
		Auto power off	Off
To Advanced settings		OSD Language	English (UK)
(see page 23, 24)
Advanced settings	1/2

Normalise	Normal	0
Black extension
Input level		0
Gamma		2.2

AGC	Off	Setup	2/2
Advanced settings	2/2	Screensaver
		MULTI DISPLAY Setup

W/B High R		0					Portrait Setup
W/B High G		0					Set up TIMER
W/B High B		0				PRESENT TIME Setup
W/B Low R		0
W/B Low G		0
W/B Low B		0
						To Sound adjust menu
						(see page 25)
						Sound		1/2
						Normalise	Normal
To Pos. /Size adjust menu (see page 19)						Bass		0
						Mid		0
During “Video (S Video)”, “Digital”,			During “Component”, “RGB”			Treble		0
						Balance		0
“SDI” and “HDMI” input signal.			and “PC” input signal.			Surround		Off
						Audio Out (PIP)		Main
Pos. /Size			Pos. /Size
Normalise	Normal		Normalise	Normal		When HD-SDI Terminal Board with
Auto Setup		0	Auto Setup		0	audio (TY-FB10HD) is installed
H-Pos			H-Pos			SDI Sound Output		2/2
H-Size		0	H-Size		0
V-Pos		0	V-Pos		0
V-Size		0	V-Size		0	Left Channel		Channel 1
1:1 Pixel Mode		Off	Dot Clock		0	Right Channel		Channel 1
			Clock Phase		0	Sound Out		Off

1:1 Pixel Mode Off Level Meter Off

16