Panasonic TH-103PF10EK manual Sync, Freq. kHz / V-Freq. Hz, Setting RGB sync signal

Setup for Input Signals

Sync

Select Signal from the “Setup” menu during RGB input signal.

1 Press to adjust.

Setup	1/2
Signal
Component/RGB-in select
	RGB
Input label	PC
Power save	Off
Standby save	Off
Power management	Off
Auto power off	Off
OSD Language	English (UK)

2		Press ACTION (	) button
	Press to exit from adjust mode.	Signal	[ RGB ]
		Sync	Auto
		Cinema reality	Off
		P-NR	Off

Setting RGB sync signal:

Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).

Auto: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.

SyncAuto

Sync on G

SyncVBS

H-Freq. (kHz) / V-Freq. (Hz)

Displays the H (Horizontal) / V (Vertical) frequencies.

This display is valid only for RGB / PC and Digital input signal.

Display range:
Horizontal	15	- 110 kHz
Vertical	48	- 120 Hz

H-Freq. 33.8 kHz

V-Freq. 60.0 Hz

42