Panasonic TH-103PF10EK manual Options Adjustments, Effect Adjustments

Page 43

Options Adjustments

1

2

3

4

5

6

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed. Press to select your preferred menu.

Press to adjust the menu.

Press to exit from

Options menu.

Options

1/3

Weekly Command Timer

Onscreen display			On
Initial INPUT
Initial INPUT			Off
Initial VOL level		Off	0
Maximum VOL level
Maximum VOL level		Off	0
INPUT lock
INPUT lock			Off
Button lock
Button lock			Off
Remocon User level
Remocon User level			Off
Advanced PIP
Advanced PIP			Off

Item		Effect							Adjustments
Weekly
Command					Sets Weekly Command Timer. (see page 47)
Command					Sets Weekly Command Timer. (see page 47)
Timer
					On: Displays all the following on screen.
					• Power on display
Onscreen					• Input signal switch display
display	On		Off		• No signal display
					• Mute and the remaining time of off-timer after was pressed.
					Off: Hides all the items above from view.

					Off	PC	INPUT1	INPUT2	INPUT3
					Adjusts the input signal when the unit is turned on.
					Notes:
Initial INPUT					• Only the adjusted signal is displayed. (see page 13)
Initial INPUT					• Signal can be displayed when the Terminal board is installed.

					• This menu is available only when “INPUT lock” is “Off”.
					• When a dual input terminal board is attached, A or B is displayed depending on the selected
					input signal. (Ex. INPUT1A, INPUT1B)

43

Image 43

Contents English High Deﬁnition Plasma DisplayOperating Instructions Model No. TH-103PF10EKTable of Contents Important the Moulded Plug Important Safety NoticeTransport only in upright position Safety PrecautionsSetup Do not place any objects on top of the Plasma DisplayWhen using the Plasma Display Safety PrecautionsIf problems occur during use Take steps to prevent toppling Clean the power cable regularly to prevent it becoming dustyAccessories Supply AccessoriesRemote Control Batteries Open ConnectionsAudio OUT Terminals connection AC cord ﬁxing ClosePC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorConnections Basic format for control data CommandSerial Terminals connection Communication parametersComponent / RGB connection DVI-D Input Connector Pin LayoutsSignal Name DVI-D connectionRight side surface Power On / OffConnecting the AC cord plug to the Plasma Display Connecting the plug to the Wall OutletInitial selections Selecting the input signalSelecting the On-Screen Menu Language Basic Controls Basic Controls See page 23 On-Screen Menu DisplaysOn-Screen Menu Displays SignalAspect Controls Normalisation Adjusting Pos. /SizeAdjusting Pos. /Size Multi PIP Options Advanced PIPCinema Picture AdjustmentsNormal DynamicPicture Adjustments Advanced settingsSound Adjustment On Off Sound AdjustmentSDI Sound Output MuteSelect the magniﬁcation required for the enlarged display Digital ZoomDisplay the operation guide Select the area of the image to be enlargedPresent Time Setup Present Time Setup / Set up TimerPresent Time Setup / Set up Timer Set up TimerReversal / Scroll selection Mode selectionStart setting Screensaver For preventing image retentionReduces screen image retention Setup of Screensaver TimeScreensaver For preventing image retention Side Panel Adjustment Customizing the Input labels Reduces power consumptionAddition sign Selected Input How to Setup Multi Display Setup for Multi DisplayDisplay Number locations for each arrangement Examples Setup for Multi DisplayAI-synchronization ID Remote Control FunctionID remote control button operation ID CancellationHow to setup Portrait Set up for PortraitViewing Area / Location Set up for PortraitComponent / RGB-in select Setup for Input Signals3D Y/C Filter For Ntsc AV images NR / Block NR / Mosquito NR Setup for Input SignalsCinema reality Colour system / Panasonic AutoDisplays the H Horizontal / V Vertical frequencies Setting RGB sync signalSync Freq. kHz / V-Freq. HzEffect Adjustments Options AdjustmentsOptions Adjustments On Sets the colour temperature for TV studio Off-timerInitial Power Off Nullify all the settings adjustedNormalization Weekly Command Timer Weekly Command TimerPress to select Time / Command Shipping condition Plasma Display panel TroubleshootingDVI-D DVI-D/COMPONENT/RGB/PC input signalsCommand list of Weekly Command Timer Speciﬁcations Memo Memo Customer’s Record For business users in the European UnionSales and Support Information Customer Care Centre