Panasonic TH-103PF10EK manual Initial selections, Selecting the input signal

Page 13

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.

Input signals will change as follows:

INPUT1 INPUT2 INPUT3 PC

Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the input mode.

This button is used to switch directly to INPUT mode.

These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal.

When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B)

Notes:

•Selecting is also possible by pressing the INPUT button on the unit.

•Input terminal will not be selected if the terminal board is not installed into the SLOT.

•Select to match the signals from the source connected to the component/

RGB input terminals. (see page 39)

•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

•Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 50), but this function is not the perfect solution to image retention.

ENTER/

+ /

VOL

- /

MENU

INPUT

Selecting the On-Screen Menu Language

Press to display the Setup menu.

Press to select the OSD Language.

Press to select your preferred language.

Selectable languages

English(UK)

Deutsch

Français

Italiano

Español

ENGLISH(US)

.......(Chinese)

.......(Japanese)


		Setup			1/2


		Signal

		Component/RGB-in select
						RGB

		Input label				PC

		Power save				Off

		Standby save				Off

		Power management				Off

		Auto power off				Off

		OSD Language			English (UK)

13

Image 13

Contents Operating Instructions High Deﬁnition Plasma DisplayModel No. TH-103PF10EK EnglishTable of Contents Important the Moulded Plug Important Safety NoticeSetup Safety PrecautionsDo not place any objects on top of the Plasma Display Transport only in upright positionWhen using the Plasma Display Safety PrecautionsIf problems occur during use Take steps to prevent toppling Clean the power cable regularly to prevent it becoming dustyAccessories Supply AccessoriesRemote Control Batteries Audio OUT Terminals connection ConnectionsAC cord ﬁxing Close OpenPC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorConnections Serial Terminals connection CommandCommunication parameters Basic format for control dataSignal Name DVI-D Input Connector Pin LayoutsDVI-D connection Component / RGB connectionConnecting the AC cord plug to the Plasma Display Power On / OffConnecting the plug to the Wall Outlet Right side surfaceInitial selections Selecting the input signalSelecting the On-Screen Menu Language Basic Controls Basic Controls See page 23 On-Screen Menu DisplaysOn-Screen Menu Displays SignalAspect Controls Normalisation Adjusting Pos. /SizeAdjusting Pos. /Size Multi PIP Options Advanced PIPNormal Picture AdjustmentsDynamic CinemaPicture Adjustments Advanced settingsSound Adjustment SDI Sound Output Sound AdjustmentMute On OffDisplay the operation guide Digital ZoomSelect the area of the image to be enlarged Select the magniﬁcation required for the enlarged displayPresent Time Setup Present Time Setup / Set up TimerPresent Time Setup / Set up Timer Set up TimerStart setting Mode selectionScreensaver For preventing image retention Reversal / Scroll selectionReduces screen image retention Setup of Screensaver TimeScreensaver For preventing image retention Side Panel Adjustment Customizing the Input labels Reduces power consumptionAddition sign Selected Input How to Setup Multi Display Setup for Multi DisplayDisplay Number locations for each arrangement Examples Setup for Multi DisplayID remote control button operation ID Remote Control FunctionID Cancellation AI-synchronizationHow to setup Portrait Set up for PortraitViewing Area / Location Set up for PortraitComponent / RGB-in select Setup for Input Signals3D Y/C Filter For Ntsc AV images NR / Block NR / Mosquito NR Setup for Input SignalsCinema reality Colour system / Panasonic AutoSync Setting RGB sync signalFreq. kHz / V-Freq. Hz Displays the H Horizontal / V Vertical frequenciesEffect Adjustments Options AdjustmentsOptions Adjustments Initial Power Off-timerOff Nullify all the settings adjusted On Sets the colour temperature for TV studioNormalization Weekly Command Timer Weekly Command TimerPress to select Time / Command Shipping condition Plasma Display panel TroubleshootingDVI-D DVI-D/COMPONENT/RGB/PC input signalsCommand list of Weekly Command Timer Speciﬁcations Memo Memo Customer’s Record For business users in the European UnionSales and Support Information Customer Care Centre